sensarmy Posted July 25, 2015 Report Posted July 25, 2015 They are 12" DVC 1 ohm, can someone ID them?
reedal Posted July 25, 2015 Report Posted July 25, 2015 I'm sure you thought of it already, but did you look at the bottom of the magnet? The HDS series are labeled there SMD Tool Map https://www.stevemeadedesigns.com/board/topic/193176-smd-tool-map-new-november-2014/ Build log https://www.stevemeadedesigns.com/board/topic/197217-reeds-03-tahoe-hat-sqaq-singer-xs-shca-cockbox-80prs/?page=32
sensarmy Posted July 25, 2015 Author Report Posted July 25, 2015 Yes ive looked, I could not see any markings or model here is a magnet pic
reedal Posted July 25, 2015 Report Posted July 25, 2015 whats the diameter of the magnet? the HDC3 series for the latest SQ model is 8.7inches, and i would imagine that probably hasnt changed with the name. SMD Tool Map https://www.stevemeadedesigns.com/board/topic/193176-smd-tool-map-new-november-2014/ Build log https://www.stevemeadedesigns.com/board/topic/197217-reeds-03-tahoe-hat-sqaq-singer-xs-shca-cockbox-80prs/?page=32
reedal Posted July 25, 2015 Report Posted July 25, 2015 Waitttt!! They don't liste the magnet diameter for the HDC4. How much does it weigh? Edit: HDC312 magnet weight = 21.25pounds HDC412 magnet weight = 64pounds SMD Tool Map https://www.stevemeadedesigns.com/board/topic/193176-smd-tool-map-new-november-2014/ Build log https://www.stevemeadedesigns.com/board/topic/197217-reeds-03-tahoe-hat-sqaq-singer-xs-shca-cockbox-80prs/?page=32
sensarmy Posted July 25, 2015 Author Report Posted July 25, 2015 Just weighed it, the sub is around 50 lbs
sensarmy Posted July 25, 2015 Author Report Posted July 25, 2015 How do i know if it has a copper coil or not?
reedal Posted July 25, 2015 Report Posted July 25, 2015 Cause it will look like copper I'd assume. I've never seen an aluminum coil, but I'm sure it would look grey like aluminum. So I'd say you have the HDC4 due to the weight. I know they made a new version of them when they changed the name, but I think the magnet and logo were the only changes. AMI customs is the guy to ask though SMD Tool Map https://www.stevemeadedesigns.com/board/topic/193176-smd-tool-map-new-november-2014/ Build log https://www.stevemeadedesigns.com/board/topic/197217-reeds-03-tahoe-hat-sqaq-singer-xs-shca-cockbox-80prs/?page=32
Kyblack76 Posted July 25, 2015 Report Posted July 25, 2015 is the coil 4" ? SMD SUPER SELLER The Burban Build Blazer Build sold Acura trunk build sold
Recommended Posts
Archived
This topic is now archived and is closed to further replies.