inferno1985 Posted September 7, 2015 Report Share Posted September 7, 2015 topic. looking for a cut sheet if anyone is able to make one for me. been using prefabs for lower end systems ive had but i now have some good equipment and would like to get the full potential out of my setup and really hear what a good setup sounds like. id need 32Wx26Dx15H outside dimensions. looking for 4.5 net @ 32hz after displacement, bracing corners dbl baffle, etc 3/4'' wood thanks. Link to comment Share on other sites More sharing options...
rockFord_Expedition Posted September 7, 2015 Report Share Posted September 7, 2015 you need a design before someone can make cut sheets for you Old School/New School RF Build March 2015 SOTM Winner How to crimp large wire Link to comment Share on other sites More sharing options...
inferno1985 Posted September 7, 2015 Author Report Share Posted September 7, 2015 you need a design before someone can make cut sheets for you if i had a design i wouldnt need a cut sheet thanks should have mentioned that as well. Link to comment Share on other sites More sharing options...
reedal Posted September 7, 2015 Report Share Posted September 7, 2015 For your design, whoever does it, needs to know what subs, and how much power will be pushing them, what vehicle it's going into. SMD Tool Map https://www.stevemeadedesigns.com/board/topic/193176-smd-tool-map-new-november-2014/ Build log https://www.stevemeadedesigns.com/board/topic/197217-reeds-03-tahoe-hat-sqaq-singer-xs-shca-cockbox-80prs/?page=32 Link to comment Share on other sites More sharing options...
inferno1985 Posted September 7, 2015 Author Report Share Posted September 7, 2015 ok. well if anyone can design me a box and a cutsheet for a reasonable price or free, pm me ill give you all the info you need. thanks Link to comment Share on other sites More sharing options...
MotorCityFats13 Posted September 7, 2015 Report Share Posted September 7, 2015 OP wants 4.5 net @ 32hz after displacement so we need sub displacements and how many you are running... would you like slot or square port, and then someone can figure in optimum port area with the power you are planning to run.... I think the fun part is doing all the math and watching it all come together.... my latest box only took me about 4 hours while watching tv Link to comment Share on other sites More sharing options...
inferno1985 Posted September 7, 2015 Author Report Share Posted September 7, 2015 2 ab xr12's not sure on the displacement. as for the port. whatever uses less airspace. with the dims i gave. 2000watts Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.