David Jensen Posted October 4, 2015 Report Share Posted October 4, 2015 Hi - I am looking to seal my rear hatch window shut to prevent rattling in my 05 yukon. I have stopped the rattle in the rear AC vent covers, but the rear window still flexes pretty hard and rattles quite a bit. When I press on the window hard when the bass is hitting, it stops the rattle. Can anybody share how to accomplish this? Also as a side note, when taking off the rear windshield wiper, what can I use to fill the hole there? Link to comment Share on other sites More sharing options...
Hotdog Posted October 4, 2015 Report Share Posted October 4, 2015 I would like to help you but I don't know how you are going to stop it outside building a panel to cover and seals around the window on the inside so the pressure never reaches the window. (NEW) 2004 F-150 Build Log -->http://www.stevemeadedesigns.com/board/topic/192208-hotdogs-f-150-build-log/ 2003 Mercury Mountaineer Build Log --> http://www.stevemeadedesigns.com/board/topic/114380-hotdogs-2003-mountaineer-build-log-20-removed/page__gopid__1602379#entry1602379 2008 Equinox Build Log --> http://www.stevemead...g/#entry1475764 Link to comment Share on other sites More sharing options...
mbdblue Posted October 4, 2015 Report Share Posted October 4, 2015 can use urethane to bond the hatch closed, prep both sides beforehand. usually you can take off the wiper and leave the post sticking out. AA-Atomic-Clif Designs-DC-Diamond-Digital Designs-Directed-Eclipse-Fi-Hertz-Hifonics-Kenwood-Memphis-Phoenix Gold-Pioneer-PPI-PSi-Stinger-Sundown-TC Sounds-Viper-Zapco Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.