Jump to content

Opinions On If My Current Build Using 8" Subs Is Decent For Spl


Recommended Posts

IV had six rockford p2 8's sitting brand new in my room for 6 months so Iv decided to build something for a sound comp that me and my shops owner are going to enter this weekend. the box Im going to build today(time permitting at work) has three separate chambers at 1.54 cu ft each with a pair of 8's per chamber ported. The enclosure is going where my backseat was in my 95 mustang Gt powered by my Xtant 1001DX with the subs firing up and the three 4x13" ports firing forward tuned to about 40-45hz. Do you think this will get decently loud even though its hard to do in a stang? One other question I have is iv anyone can help me with the wiring on my subs to get them as close to 1 ohm as possible, their all dual 4 ohm subs but I cant figure out hoe to wire them up... thanks for any help

Jose

Link to comment
Share on other sites

IV had six rockford p2 8's sitting brand new in my room for 6 months so Iv decided to build something for a sound comp that me and my shops owner are going to enter this weekend. the box Im going to build today(time permitting at work) has three separate chambers at 1.54 cu ft each with a pair of 8's per chamber ported. The enclosure is going where my backseat was in my 95 mustang Gt powered by my Xtant 1001DX with the subs firing up and the three 4x13" ports firing forward tuned to about 40-45hz. Do you think this will get decently loud even though its hard to do in a stang? One other question I have is iv anyone can help me with the wiring on my subs to get them as close to 1 ohm as possible, their all dual 4 ohm subs but I cant figure out hoe to wire them up... thanks for any help

Jose

yes 6-8s can get quite loud and sound quite good as well.

Tuning is right on 40-45hz is good for 8's.

If you have a 1 channel/mono amp...and 6 dual 4ohm subs...you can get it down to 1.33ohms.

towards the bottom of this page...

http://mobile.jlaudio.com/support_pages.php?page_id=161

Edited by LSN2meBoom916

COOGLE SAID:"bro thats how we got where we are... buy making messes ...... i still learn all the time you just gota be willing to ruck up some shit" "In order to attain the impossible, one must attempt the absurd." ~ Miguel de Unamuno"One machine can do the work of fifty ordinary men, but no machine can do the work of one extraordinary man" -Elbert Hubbard"A proud man can learn humility...but he will be proud of that too" ~I forget who.I'm far from perfect and I know it better than anyone, but I hope to be good at what I do, when I do it...Installs I've done:My Integra: http://www.stevemeadedesigns.com/board/ind...?showtopic=3161The Lexus : http://www.stevemeadedesigns.com/board/ind...?showtopic=1535Law's Maxima: http://www.stevemeadedesigns.com/board/ind...ic=5568&hl=Jeff's 2500HD: http://www.stevemeadedesigns.com/board/ind...ic=5382&hl=Acura RSX-S: http://www.stevemeadedesigns.com/board/ind...?showtopic=3142Z-32 300zx: http://www.stevemeadedesigns.com/board/ind...?showtopic=34602004 Civic 4dr: http://www.stevemeadedesigns.com/board/ind...?showtopic=8190Trunk/Corner Box: http://www.stevemeadedesigns.com/board/ind...c=16036&hl=1969 Chevy C-10: http://www.stevemeadedesigns.com/board/ind...c=20319&hl=Seat-Back AMP-RACK How-to: http://www.stevemeadedesigns.com/board/ind...ic=9428&hl=Bunch of subs still for salehttp://www.stevemeadedesigns.com/board/ind...l=lsn2meboom916"It's game night...we're playin......sex."~Quagmire"When disneyland started it was powered completely by orphan children running on treadmills to generate e-lectrissty…and today, them children are New York Yankees". ~Dale Gribble"Fill it with ice...then pour it up to the top of the ice...& Shut da Fu** up!" ~Urs truly.

Link to comment
Share on other sites

I would try it but the port going up or if you pull the back seat, a down fire box raised about 4 inches off the ground may be louder. A bandpass would be louder for SPL purposes, maybe a dual tuned bandpass.

2003 Ford F-150 Reg Cab layin body on 26's

2003 Tahoe 3/5 drop on 26's with a 408cid Supercharged engine.

2011 Camaro 2SS 2005 VW GTI Stage II ECU, CAI, 3" turbo back exhaust, FMIC, lowered 2" on some plastidipped 18's

2003 Hayabusa lowered, stretched, cams, nitrous and custom paint

Link to comment
Share on other sites

  • 2 weeks later...

I finished the system a felast week and Im hoping to meter it later today but I have a question about the ohm load... I wired it up as I was told and it was sitting at 2.11 ohms instead of 1.33 like it should, a buddy of mine said that it would drop after 20-30 hours of playing time since the subs are new. Well it still hasnt dropped at all and my xtant only puts out 500 watts at 2 ohms, It needs closer to 1ohm to put out the 1000... any advice?

Link to comment
Share on other sites

i heard that 8's are really good for t-line enclosures

Do you read ur own response b4 you post?...or just type ur gut reaction and headbutt the enter key? :blink:

How bout this, the Caddy sounds so damn good it can put a smile on a "deaf mans" face :)

mat then mix hardener into resin and soak mat. beeeeeyaw glassing for n00bs

SMDsigbannr9.jpg

Link to comment
Share on other sites

Tried flipping it around??

port back?

2008 California state record holder 157.2 Bassrace2009 California state record holder 157.0 BassraceRollin 50's 158.7db2009 King of Cali Bassrace2009 USACi score 160.5 @ 42hz
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Who's Online   0 Members, 0 Anonymous, 1766 Guests (See full list)

    • There are no registered users currently online
×
×
  • Create New...