audiofanaticz Posted November 29, 2016 Report Share Posted November 29, 2016 Do you have a pic of how the coil separated? Not the windings in the gap, but the actual former that is glued to the spiders/cone Link to comment Share on other sites More sharing options...
audiofanaticz Posted November 29, 2016 Report Share Posted November 29, 2016 If you have any other questions just hit me up. Ive done so many drop in recones and full 1 off builds I should be able to answer the majority of questions. Link to comment Share on other sites More sharing options...
frogcase2002 Posted November 30, 2016 Author Report Share Posted November 30, 2016 Do you have a pic of how the coil separated? Not the windings in the gap, but the actual former that is glued to the spiders/cone No pictures of that . . I just looked through the basket and there was only like half inch of coil left on the former. . So I took the sub apart and there were just chunks of the coil down in the gap Clarion cz702 Ssa evil mids and tweeters ppi 900.4 2 zcon 18s Taramps 10k 3 big dekas 1 xs 3 runs of 4/0 and big 3 300+ amp ohio generator 155.7 on dash at 36 (peak) 152 at 25 Link to comment Share on other sites More sharing options...
audiofanaticz Posted November 30, 2016 Report Share Posted November 30, 2016 Is the coil discolored at all or smell burnt? Link to comment Share on other sites More sharing options...
frogcase2002 Posted November 30, 2016 Author Report Share Posted November 30, 2016 Is the coil discolored at all or smell burnt? Not at all . . Thats why I dont understand how it happen Clarion cz702 Ssa evil mids and tweeters ppi 900.4 2 zcon 18s Taramps 10k 3 big dekas 1 xs 3 runs of 4/0 and big 3 300+ amp ohio generator 155.7 on dash at 36 (peak) 152 at 25 Link to comment Share on other sites More sharing options...
whazoo84 Posted November 30, 2016 Report Share Posted November 30, 2016 Is the coil discolored at all or smell burnt? Not at all . . Thats why I dont understand how it happen Well, if it didn't burn, maybe this was a manufacturing defect. If the coil wasn't glued together properly, it may have separated and when the coil came slamming down, it smashed itself into the gap. Could be what's happening. Link to comment Share on other sites More sharing options...
frogcase2002 Posted December 1, 2016 Author Report Share Posted December 1, 2016 Finally got it out . . Was a bitch getting all out lol . . Had to get it out in like one inch pieces at a time Clarion cz702 Ssa evil mids and tweeters ppi 900.4 2 zcon 18s Taramps 10k 3 big dekas 1 xs 3 runs of 4/0 and big 3 300+ amp ohio generator 155.7 on dash at 36 (peak) 152 at 25 Link to comment Share on other sites More sharing options...
frogcase2002 Posted December 1, 2016 Author Report Share Posted December 1, 2016 Now can anyone recommend some ca glue to use to recone it . That I could buy locally . Iv only bought online and cant wait for some to ship right now Clarion cz702 Ssa evil mids and tweeters ppi 900.4 2 zcon 18s Taramps 10k 3 big dekas 1 xs 3 runs of 4/0 and big 3 300+ amp ohio generator 155.7 on dash at 36 (peak) 152 at 25 Link to comment Share on other sites More sharing options...
audiofanaticz Posted December 1, 2016 Report Share Posted December 1, 2016 Most likely not going to find any ideal ca that is ideal to use since most are a special blend for woofers, so you would be better off with 5minute epoxy. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.