Sundown e12 v2: 10 pounds of port in a 5 pound box

[Dysentery4You]

Hoping someone can help me figure out a ported enclosure design for a Sundown e12.  Sundown says this sub wants 1.75 cu ft of space, port area of at least 28 inches, and a box tuning of 32 hz.  This much port area would be a 6 inch round port.  However, with a 1.75 cu ft enclosure on a 6 inch round port, this is going to be a port length of like 38 inches long or so.

Anyone have some good ideas for how to build a rectangular enclosure (Ford Fusion) that would keep the port internal and still make this sub happy?

[liquidbadger]

I'd research box design software If it was me. I don't know one off the top of my head.

Regards,

Liquidbadger (insta & youtube)

[Triticum Agricolam]

In these situations a slot port is usually easier to implement because you can wrap it around the inside of the box to get the length you want.  

[WalledSonic]

15 hours ago, Dysentery4You said:

Hoping someone can help me figure out a ported enclosure design for a Sundown e12.  Sundown says this sub wants 1.75 cu ft of space, port area of at least 28 inches, and a box tuning of 32 hz.  This much port area would be a 6 inch round port.  However, with a 1.75 cu ft enclosure on a 6 inch round port, this is going to be a port length of like 38 inches long or so.

Anyone have some good ideas for how to build a rectangular enclosure (Ford Fusion) that would keep the port internal and still make this sub happy?

That username though lol