Crossover settings on AMP for sealed enclosure.

[Dragonware]

Recently downgraded from 4 cubes ported tuned to 32hz  with dual 12 RE audio subs. To 2 cubes sealed. My amp was set Low pass at 35hz and sub sonic to 15hz.

 

My question is my new setup is a sealed enclosure 2 cubes same subs. do I need to adjust my cross over settings on the amp now ?

 

I have an epicenter which can mimic the bass that i use to get with the ported  its still not as loud and I know its not an ideal situation but what would be the best settings im using a Hifonics Brx 2000.1D

[MotorCityFats13]

lowpass at 35hz? why do you want to limit the output at that low of a note?  most people are very happy with LP set at 80hz and subsonic at 20hz..... you are really cutting most of your usable bandwidth because im sure your door speakers/midbass cant make up for this

[Kyblack76]

And a infrasonic set at 15hz is useless  Especially tuned at 32hz.  But, if it sound good to you, have at it. I suggest doing the same thing on the sealed enclosure your now running. Set where it sounds good to you.