mobilehomeguy Posted April 2, 2018 Report Share Posted April 2, 2018 Box design for single AB xfl 15. Going to feed it roughly 900 watts RMS.any suggestions would be appreciated Link to comment Share on other sites More sharing options...
Joe X Posted April 2, 2018 Report Share Posted April 2, 2018 What's the vehicle? Link to comment Share on other sites More sharing options...
AlpineNut Posted April 2, 2018 Report Share Posted April 2, 2018 http://www.americanbassusa.com/Subwoofers/Box-Designs.html 73456w9vbwevsdb sodtbsorutnvsd sdtuspdun sd d f gsdfiusd gdf n Link to comment Share on other sites More sharing options...
mobilehomeguy Posted April 2, 2018 Author Report Share Posted April 2, 2018 Hi Joe,no vehicle involved.this is a home audio set up.the only issue here is it needs to be 24" tall and 18" deep max.thanks for your response.almost forgot,I'd like the port forward facing same as sub.thanks again. Link to comment Share on other sites More sharing options...
Joe X Posted April 3, 2018 Report Share Posted April 3, 2018 So here is a suggestion, the round port needs to turn so an inexpensive fitting would be needed: Link to comment Share on other sites More sharing options...
mobilehomeguy Posted April 4, 2018 Author Report Share Posted April 4, 2018 Hey Joe,thanks alot.i plan to build right away,just have one question.instead of 6x26 port,can I use 2 3x13 ports.i have 3" materials laying around Link to comment Share on other sites More sharing options...
Joe X Posted April 4, 2018 Report Share Posted April 4, 2018 Unhappily you can't, a 3" port is only about 7 square inches of port area, you would need 4 of them but even if you could your 4 ports would be a less efficient setup than a single 6". Link to comment Share on other sites More sharing options...
mobilehomeguy Posted April 4, 2018 Author Report Share Posted April 4, 2018 I understand,thanks Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.