empAUDIO Posted May 11, 2018 Report Share Posted May 11, 2018 3/22/16 When I first got the truck. At this point the only thing on it was 5% tint all around and 45% on the windshield. I have been following this forum for years and now that I will be installing a system on my Escalade I figured I would post it. For now all I have is bought a bunch of cool stuff. A bunch of goodies! Check it out. Rockford 2gauge next to the 3/0 gauge. I have more goodies arriving tomorrow. Link to comment Share on other sites More sharing options...
empAUDIO Posted May 13, 2018 Author Report Share Posted May 13, 2018 80 mil deadening mat $64 on Amazon ?? Have had this eq for 10 years brand new in my closet. Skar SKv2-4500.1d 4/0 cable cutter $17 on Amazon great deal. Hammer crimper $22 also on Amazon ?? I will start running wires today. Link to comment Share on other sites More sharing options...
Wishuponasub Posted May 13, 2018 Report Share Posted May 13, 2018 Nice quallity stuff man. Following. Sitting around waiting to be installed: 4 FI X 10 270 CES alt D3400/73ah lithium AA 3800.1 (2) AA 75.4 Link to comment Share on other sites More sharing options...
twalker182 Posted May 13, 2018 Report Share Posted May 13, 2018 2 hours ago, Wishuponasub said: Nice quallity stuff man. Following. I agree. One word of advice......a few guys a while back said to stay way from t-nuts. Just a word of caution. One guy suggested using Spax screws. I used those over a year ago and have had no issues at all. 2010 Accord Sedan XS D3400R Clarion HU Sundown mids and highs Incriminator amps Incriminator Lethal Injection 12" Link to comment Share on other sites More sharing options...
SkarredSierra Posted May 14, 2018 Report Share Posted May 14, 2018 Something id like to point out is the hammer crimper. Its hard to get a good solid connection with a hammer crimper. Id suggest a hydraulic crimper. You can get ones on ebay that come in a yellow box with yellow handle for around 40 bucks. Itll give you a nice cold weld that will never come loose. Other than that looks great and cant wait to see more. Link to comment Share on other sites More sharing options...
bsneon98 Posted May 14, 2018 Report Share Posted May 14, 2018 1 hour ago, mathewyocham said: Something id like to point out is the hammer crimper. Its hard to get a good solid connection with a hammer crimper. Id suggest a hydraulic crimper. You can get ones on ebay that come in a yellow box with yellow handle for around 40 bucks. Itll give you a nice cold weld that will never come loose. Other than that looks great and cant wait to see more. was just going to suggest the same. Its well worth the money. Plus a little more versatile also. Good luck hammer crimping something in the engine bay. Build Log: http://www.stevemeadedesigns.com/board/topic/152954-1998-plymouth-neon-updates/ Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.