Impression Posted November 5, 2018 Report Share Posted November 5, 2018 Hello and thanks in advance I am not an expert in box building but have done alot in the past. I did alot if searching on the internet snd here before posting and saw alot of info on here. I am asking for help with a ported box for 2- 6.5 sundown X in a ported box. My max measurements are 35x 10x10 for space in my smart car. Would a box for 32hz be great for these woofers. I am wondering if I can get a design with port in middle and woofers side by side or just stick with the basic port on one side and both woofers on the other end. Thanks in advance Link to comment Share on other sites More sharing options...
Joe X Posted November 5, 2018 Report Share Posted November 5, 2018 So here is a suggestion, power: to subs rated, amp subsonic filter to 28Hz, minimum port clearance 1 1/2", figure is just an assembly guide: Link to comment Share on other sites More sharing options...
Impression Posted November 5, 2018 Author Report Share Posted November 5, 2018 Thanks kindly! My question is can I add a 1/2 sheet over the front of box to recess the woofers and port ? Or would this increase my port outside the box by 1/2" Link to comment Share on other sites More sharing options...
Joe X Posted November 5, 2018 Report Share Posted November 5, 2018 Yes you can, the 1/2" increased port length would not be an issue, not necessary though, just one or two rods like the one shown in the figure would work. Link to comment Share on other sites More sharing options...
Impression Posted November 5, 2018 Author Report Share Posted November 5, 2018 THANKS AGAIN!! Link to comment Share on other sites More sharing options...
Impression Posted November 6, 2018 Author Report Share Posted November 6, 2018 22 hours ago, Joe X said: Yes you can, the 1/2" increased port length would not be an issue, not necessary though, just one or two rods like the one shown in the figure would work. What if i add a small piece behind the woofers inside the box and use that to recess them would the cubic space change ? the woofers would mount 3/4 lower Sorry for the newbie questions Link to comment Share on other sites More sharing options...
bmwking Posted November 6, 2018 Report Share Posted November 6, 2018 2 hours ago, Impression said: What if i add a small piece behind the woofers inside the box and use that to recess them would the cubic space change ? the woofers would mount 3/4 lower Sorry for the newbie questions that would change the inner volume yes. for minimal effect, adding a double baffle is the way to go. Link to comment Share on other sites More sharing options...
Joe X Posted November 6, 2018 Report Share Posted November 6, 2018 3 hours ago, Impression said: What if i add a small piece behind the woofers inside the box and use that to recess them would the cubic space change ? the woofers would mount 3/4 lower Sorry for the newbie questions Here's something different that keeps your internal volume and lets you recess your subs: Power: to subs rated, amp subsonic filter to 28Hz, minimum port clearance 1 5/8", figure is just an assembly guide: Link to comment Share on other sites More sharing options...
Impression Posted November 8, 2018 Author Report Share Posted November 8, 2018 Thanks Bmwking and JOE X!!! I hope this turns out great for me as I will build this weeked!! Link to comment Share on other sites More sharing options...
Impression Posted November 8, 2018 Author Report Share Posted November 8, 2018 Hey Joe X can I bother you 1 more design? Same design as the last one you sent with 3 woofers instead of 2. This is just incase I decide to add more bass . THANKS IN ADVANCE . I have been on plenty of forums and never experienced this type of response as I'm loving this forum? Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.