SuzukiGS750EZ Posted December 26, 2020 Report Posted December 26, 2020 Hey guys. I've never amped mids and highs in my vehicles before. It's always been install subs, done. My question is, how do I tune the amp once installed? My front are https://powerbassusa.com/products/mobile-audio/2xl-63c-65-system/ and rears are https://powerbassusa.com/products/mobile-audio/2xl-693-6x9-full-range/ . The front speakers will be a coaxial setup unless you think there's a better way to do it. I have an o-scope i used for setting up the amp for my subs, but i'm not TOO familiar with it yet, but can take direction and do understand what i'm looking at. Just not great with it yet... i also don't know what test tone to use and how to setup head unit before tuning and also after. Can anybody guide me through please?
Dafaseles Posted December 26, 2020 Report Posted December 26, 2020 I can't guide toy through it as I have never used an oscilloscope, but for highs, people usually use 1000 hz tone to set the gain 2011 Chevy Silverado under construction My build log here. Check it out!
Recommended Posts