Taxed1 Posted August 17, 2021 Author Report Share Posted August 17, 2021 14 hours ago, MrSkippyJ said: looks pretty good. only 2 things pop out at me. Did you fuse that wiring and how is that battery mounted? Yes there are 2 250 amp fuses up front at the main AGM. The D975 in the back is crunched / sandwiched between the box & the trunk. There is also some heavy duty 3M double sided tape on the amp & battery. The boxed is sealed up from the trunk & is not moving. That battery is solid. Here are some updated pics. The SFB has been replaced with a SIA-3500, OMG what a beast of an amp!! It is like night & day. It is really pushing the 12s now plus it has better crossovers on it. The Pioneer HU, ugh, I fried the pre-amps, the RCA outs no longer work. Long story but while replacing the amp I let the 12 volt remote touch & short out on the RCA wire from the HU. Oh yeah! The Pioneer did not like that. It no longer has output on the rca outs. It’s garbage now & out of warranty anyways. Stupid me had the radio playing while swapping amps. I purchased a new Kenwood & even though it was cheaper than the Pioneer, there are more features & more power for the rca outs & the door speakers. I upgraded the RCA wires to Stinger 6000 series. The alternator also has been replaced to a 220 amp & I got an AGM D3400R up front. Link to comment Share on other sites More sharing options...
Taxed1 Posted August 17, 2021 Author Report Share Posted August 17, 2021 More. Temco was out of black welding wire at the time so I used all red. I don’t really care, I know which is positive & negative. Link to comment Share on other sites More sharing options...
MrSkippyJ Posted August 18, 2021 Report Share Posted August 18, 2021 Good deal man. I’d add some fuses on any + lead connected to the battery but that’s just me. Solid looking over all though! F150: Stock 2019 Harley Road Glide: Amp: TM400Xad - 4 channel 400 watt Processor: DSR1 Fairing (Front) 6.5s -MMats PA601cx Lid (Rear) 6x9s - TMS69 Link to comment Share on other sites More sharing options...
Never Enough Bass Posted August 18, 2021 Report Share Posted August 18, 2021 Yea I wanna know how that battery is mounted to 06 Charger Pioneer double din Pioneer 6.5 and 6×9's Knukoncept Krystal kable rca's 0 ga knukoncept kolossus wire Big 3 same wire ^ 1 run 8g karma ss speaker wire Sundown sia 3500d at 1ohm 2 Sundown U series 12's Duralast platinum agm H7 (Main) Xs power d3400 Trying to find a ho alt Link to comment Share on other sites More sharing options...
Taxed1 Posted August 18, 2021 Author Report Share Posted August 18, 2021 1 hour ago, Never Enough Bass said: Yea I wanna know how that battery is mounted to It’s simply jammed between the box and the side of the trunk. Double sided tape & I slid the box over to the right to jam the battery in then I sealed the box in place. It ain’t moving. Maybe in a roll over crash it can go flying but even still the 4x1/0 wire isn’t going to let it go far, other than that it’s stuck. The XSPower D975 is not that big nor is it chunky. It’s like maybe the size of 3 6volt batteries. 7.83x5.53x6.67 https://4xspower.com/Wattage-Chart.pdf I will take better pictures. You can see the black edge of the box pushing on the battery mid-way. The wood you see behind the battery is like 5 inches back. Weird illusion. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.