Jump to content

Recommended Posts

Looks good. I would get rid of the 750. Its not good to have 2 different amps giong to different subs unless they are the same amp and same subs. But thats how I have mine setup. Front battery to the second battery and have them wired off the second battery. Did you upgrade your alt wires by any chance?

not yet, im planning on doing it withing the next few days

injineer.jpg

Clarion ProAudio VRX755VD

Infinity Perfects 6.1-front

Infinity Perfects 5.1 -rear

Infinity REF7541A

3 Kicker S15L7D2

Kicker ZX1500.1

Kicker ZX750.1

Pair of Memphis tweets

]noise1.jpg

New Build In The Works

Link to comment
Share on other sites

in theory three subs may actually get similar power.... (never thought of that)

1500rms/2 = 750 per woofer + 1 woofer with a 750.... hmmm....

i wouldnt personally because i think you would have phase issues and slight cancellation, but maybe not enough to notice... never know till you give it a try!!

-Drew

I would think that if your set up is just something to listen too, if would be fine. but that shouldn't be anything long term. Very interest in theory.

TeamSundown-3.jpgTeamNemesislogo.jpg

If you build it, db's will come...

NSPL World Record Holder Trunk 0-1800 watts---147.9 with 1722 clamped watts @ 40Hz(9-20-09).

Competition Only Record Holder Trunk 0-500 watts---148.1

2006 Nissan Altima 3.5 SE

Currently Rebuilding....

My 150db Plus Trunk Build

I do box designs.

[benH] 6:24 pm: clipping doesn't really hurt subs

[benH] 6:24 pm: being an idiot is what blows subs

Link to comment
Share on other sites

I would think that if your set up is just something to listen too, if would be fine. but that shouldn't be anything long term. Very interest in theory.

well i want to have good numbers when i get it metered. im not gonna do any bassraces or anything. I guess its just a daily cruiser/ hopefully a GP. My goal is to be halfway like steve hahahaha

thats a joke by the way...

no one man can be half of steve

Edited by 01tahoeman

injineer.jpg

Clarion ProAudio VRX755VD

Infinity Perfects 6.1-front

Infinity Perfects 5.1 -rear

Infinity REF7541A

3 Kicker S15L7D2

Kicker ZX1500.1

Kicker ZX750.1

Pair of Memphis tweets

]noise1.jpg

New Build In The Works

Link to comment
Share on other sites

Not wanting to spend too much money for the wiring.

wiring.jpg

You might as well get this thought out of your head.

The wiring is one of the most important parts of any install and the most over looked.

Don't skimp on the important stuff.

Isobaric - Refers to the practice of coupling two drivers together to make them act as one.

"Giving up doesn't always mean you are weak; sometimes it means that you are strong enough to let go."

Insanity: doing the same thing over and over again and expecting different results.

The Destruction of a person builds character.

 

Terryswork001.png

Link to comment
Share on other sites

You might as well get this thought out of your head.

The wiring is one of the most important parts of any install and the most over looked.

Don't skimp on the important stuff.

yeah the second one is the one im going with

injineer.jpg

Clarion ProAudio VRX755VD

Infinity Perfects 6.1-front

Infinity Perfects 5.1 -rear

Infinity REF7541A

3 Kicker S15L7D2

Kicker ZX1500.1

Kicker ZX750.1

Pair of Memphis tweets

]noise1.jpg

New Build In The Works

Link to comment
Share on other sites

Hey man I didn't mean to have your system diagram in the quote.

Everything I said has to do with the wiring.

Sorry

Isobaric - Refers to the practice of coupling two drivers together to make them act as one.

"Giving up doesn't always mean you are weak; sometimes it means that you are strong enough to let go."

Insanity: doing the same thing over and over again and expecting different results.

The Destruction of a person builds character.

 

Terryswork001.png

Link to comment
Share on other sites

Hey man I didn't mean to have your system diagram in the quote.

Everything I said has to do with the wiring.

Sorry

oh ok, yeah thats why I put up the post. i want all of smd to look at my diagram and make sure I wire this thing up the right way

injineer.jpg

Clarion ProAudio VRX755VD

Infinity Perfects 6.1-front

Infinity Perfects 5.1 -rear

Infinity REF7541A

3 Kicker S15L7D2

Kicker ZX1500.1

Kicker ZX750.1

Pair of Memphis tweets

]noise1.jpg

New Build In The Works

Link to comment
Share on other sites

any suggestions on batteries?

i need a new one under the hood, and a smaller one to fit under the back seat.

like this one

http://www.jegs.com/i/Powermaster/713/D680/10002/-1

i might put a bigger battery under the seat.

budget-300-400 total

injineer.jpg

Clarion ProAudio VRX755VD

Infinity Perfects 6.1-front

Infinity Perfects 5.1 -rear

Infinity REF7541A

3 Kicker S15L7D2

Kicker ZX1500.1

Kicker ZX750.1

Pair of Memphis tweets

]noise1.jpg

New Build In The Works

Link to comment
Share on other sites

  • 2 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Who's Online   0 Members, 0 Anonymous, 791 Guests (See full list)

    • There are no registered users currently online
×
×
  • Create New...