Mattc43 Posted September 28, 2021 Report Share Posted September 28, 2021 Well guys making a sub up, port back, 8.5 cube, tuned to 30hz box for two 15s and I made my port about a 1/16" too wide at the opening. Have not started actually making the port itself just the opening of the port (all four walls of the box are complete, just no bracing or port (L) yet) is slightly bigger than 5 1/4" which is what is supposed to be. Will it mess with my tuning? Link to comment Share on other sites More sharing options...
audiofanaticz Posted September 28, 2021 Report Share Posted September 28, 2021 It will be fine and you wont notice anything with it being 1/16th larger. Its going to change tuning a whole 0.18hz higher and give you about 1 inch more of port area. Nothing to even worry about. Link to comment Share on other sites More sharing options...
Mattc43 Posted September 28, 2021 Author Report Share Posted September 28, 2021 8 hours ago, audiofanaticz said: It will be fine and you wont notice anything with it being 1/16th larger. Its going to change tuning a whole 0.18hz higher and give you about 1 inch more of port area. Nothing to even worry about. Thanks. Put a lot of time into this box already and I want it to be right Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.