whoopdeedoo Posted October 6, 2021 Author Report Posted October 6, 2021 Any ideas? 2004 Tahoe Z71 Pioneer 80PRS Taramps Smart 5 Sundown Xv3 15" (2) Mechman 320a XS Power D3400 (2) KnuKonceptz wire and RCAs Slam Panda knob (RJ45 model)
Never Enough Bass Posted October 6, 2021 Report Posted October 6, 2021 Subs may be fucked 06 Charger Pioneer double din Pioneer 6.5 and 6×9's Knukoncept Krystal kable rca's 0 ga knukoncept kolossus wire Big 3 same wire ^ 1 run 8g karma ss speaker wire Sundown sia 3500d at 1ohm 2 Sundown U series 12's Duralast platinum agm H7 (Main) Xs power d3400 Trying to find a ho alt
Never Enough Bass Posted October 6, 2021 Report Posted October 6, 2021 Loose connection 06 Charger Pioneer double din Pioneer 6.5 and 6×9's Knukoncept Krystal kable rca's 0 ga knukoncept kolossus wire Big 3 same wire ^ 1 run 8g karma ss speaker wire Sundown sia 3500d at 1ohm 2 Sundown U series 12's Duralast platinum agm H7 (Main) Xs power d3400 Trying to find a ho alt
Kyblack76 Posted October 8, 2021 Report Posted October 8, 2021 On 10/5/2021 at 8:03 PM, whoopdeedoo said: With everything turned off, no vibration wind or noise. The ohms would be stable unless both subs were in the box together. Again no power, movement or noise. Ohms stable on the DMM in all tests until both subs are in the box together and then it gets erratic. I've compared this to a friends 4 12's box and his stays stable. Something isn't right. No, they are fine. Edit , pull em out, put em on a table, and test em, and ill guarantee the load doesnt move. Period. Even a wrecked driver, doesnt have the load "jump everywhere". Its either a open coil (blown) or, other. A bad coil doesnt "magically jump around, when still". Period. It cant. SMD SUPER SELLER The Burban Build Blazer Build sold Acura trunk build sold
Recommended Posts
Archived
This topic is now archived and is closed to further replies.