ehall8702 Posted April 19, 2023 Author Report Share Posted April 19, 2023 So I only sent one xr back, eBay told me to dispose of second one. I flipped it over and reglued the lower spider to the voice coil tube, on top of old glue joint from factory. Used 2 part CA glue thats used for building speakers, I use it for so many things so I habe sum around usually. Can def tell was manufacturing issue as the spider let go rite where glue stopped. So for shits and giggles I tossed it back into the box I had for 2 of them and blocked off second hole. This is 4 cubes with I think was 72cuin port at 32hz...figured wtf lets see what it'll do. Wired at 1 ohm and its pretty impressive, hasnt come apart yet. So it'll get a proper box built and run it till I can afford to get a monster 18 or 2. May end up selling my tnt 15s or maybe a box for them. 2009 Silverado 1500, 7.5" lift, 37x12.50r17s, Built Gen 4 5.3L ( 4.8l flat pistons, decked 243s, SS2 Cam, Pac 1218 springs, ported intake, 120mm TB, Long tubes, 3" duals HP tuner software tuned by me), 4l80e swapped and 4.56 gears. All done by me. stereo is Pioneer avh 600ex, all stinger rca, jp23 v1.5, skar rp150.4, and hertz hpd4. 2 SHCA 6.5 8ohm, 1 SHCA 3.5", and 1 DS18 tw120pro in each door. The 3.5 mid and 3.5" tweeters are powered by the skar rp150.4, the 6.5s are powered by the hertz bridged @4 ohms. Dual runs of 3/0 welding cable, 300a alternator, 2 Vmax AGMs up front. current sub is a AB XR 12 ( dual 2 ohm) with bottom spider cut out in 2.25 cubes at 32hz Link to comment Share on other sites More sharing options...
Joe X Posted April 20, 2023 Report Share Posted April 20, 2023 See how it goes, if you have any other questions let us know. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.