Sub Selection

[Andrew2944r]

Just need a little input here...

Chevy x-tend cab Silverado is vehicle, rear seat is removed and a base floor has allready been created...

Max cubic foot for the box would be about 16... Each BTL will have it own SAZ-3000

3 - 15" BTL's

or

3 - 18" BTL's

Thanks

[Aaron813]

18's cone are FTW

[BigPimpin91]

Your looking at less than 5 ft per 18 after sub and port displacement.

I do believe 15's would be louder.

[A&W ROOTBEER]

id go with 15's because with the 18's you pretty much limited to about 5 cu per sub no where else to go, with the 15's you have more room to experiment with smaller to bigger boxes to get the sound you want..

unless you want to do 2 18's?

3 15's=530.12

2 18's=508.92

so you can see its not a huge difference..

Edited May 26, 2008 by A&W ROOTBEER

[Pitbullx]

Just need a little input here...

Chevy x-tend cab Silverado is vehicle, rear seat is removed and a base floor has allready been created...

Max cubic foot for the box would be about 16... Each BTL will have it own SAZ-3000

3 - 15" BTL's

or

3 - 18" BTL's

Thanks

if you can get 16cubes after displacement Id go with the 18s, if its before displacement go with the 15s

[Andrew2944r]

if you can get 16cubes after displacement Id go with the 18s, if its before displacement go with the 15s

So 18 cubes after displacement go with the 18's... Time for a mini Silverado wall

[tejcurrent]

So 18 cubes after displacement go with the 18's... Time for a mini Silverado wall

18s ftw

[etaks_crew]

18's would be sweet but if it comes to 2 18's or 3 15's say 15's.