Jump to content

Recommended Posts

Posted

Here ya go bubba

http://cgi.ebay.com/2-0-Copper-Cable-Lug-3...id=p3286.c0.m14

And if you were stepping up then It would 4/0 your workin with ;):D:P

Designing, building, and shipping boxes. Yahoo IM - kingsuv00If the listening level is too loud, please inform the driver, so he can promptly pull over, and let you out.

not many cars can get me to pluggin my ears but this one.......damn. I mean the first minute is ok but that thing just really starts digging deeper and deeper in your earhole till you cant stand it no more. Seems like it does it with relative ease....16 12's on 8 amps.........gotta love it. :)

Posted
Here ya go bubba

http://cgi.ebay.com/2-0-Copper-Cable-Lug-3...id=p3286.c0.m14

And if you were stepping up then It would 4/0 your workin with ;):D:P

I read that 4/0 is a wast not much bigger than 2/0 but twice as much so I got A LOT of 2/0 instead

Got it from the same place you did king SUV team bassick wire on the way 200 feet should do the trick

Have you ever had your woofers blown?

Posted
I read that 4/0 is a wast not much bigger than 2/0 but twice as much so I got A LOT of 2/0 instead

Got it from the same place you did king SUV team bassick wire on the way 200 feet should do the trick

I hear ya on the 4/0. I didn't want to do 6 runs of the 2/0 so I went with 4 of the 4/0.

Now the Excursion..... Thats a different beast B)

Designing, building, and shipping boxes. Yahoo IM - kingsuv00If the listening level is too loud, please inform the driver, so he can promptly pull over, and let you out.

not many cars can get me to pluggin my ears but this one.......damn. I mean the first minute is ok but that thing just really starts digging deeper and deeper in your earhole till you cant stand it no more. Seems like it does it with relative ease....16 12's on 8 amps.........gotta love it. :)

Posted

Just use 1/0g Ring terminals... Thats what i use...And I dont Cut any Copper to fit it...It might take a while To get the wire in there, But it works...

I dont like the Cable Lugs...There to Bulky..They suck when your trying t but a couple runs on on battery terminal... But good luck!

WWW.OSGINDUSTRIES.COM

I LOVE HATER'S

Posted (edited)
Just use 1/0g Ring terminals... Thats what i use...And I dont Cut any Copper to fit it...It might take a while To get the wire in there, But it works...

I dont like the Cable Lugs...There to Bulky..They suck when your trying t but a couple runs on on battery terminal... But good luck!

There was no way I was going to fit my 4/0 into a 3/0 lug. It was work enough to fit the 4/0 into the 4/0

And if you use the right battery terms, using those big lugs works fine.

Edited by kingsuv

Designing, building, and shipping boxes. Yahoo IM - kingsuv00If the listening level is too loud, please inform the driver, so he can promptly pull over, and let you out.

not many cars can get me to pluggin my ears but this one.......damn. I mean the first minute is ok but that thing just really starts digging deeper and deeper in your earhole till you cant stand it no more. Seems like it does it with relative ease....16 12's on 8 amps.........gotta love it. :)

Posted
There was no way I was going to fit my 4/0 into a 3/0 lug. It was work enough to fit the 4/0 into the 4/0

And if you use the right battery terms, using those big lugs works fine.

or just build buss bars then you'll have plenty of room.

Vehicle: 1997 S10 Blazer 4dr 4X4

Exterior: Rear End Bagged, Black Grill, Lifted 2"

Amplifiers: Rockford Fosgate T8004 & T10001bd

Batteries: 2 Stinger SPV35, Kinetik HC2400

Electrical: Big 3, DC Power 290amp Alternator w/ MLA at 15.5v

Enclosure: 4.2 ft³ @ 33Hz 84sq.in. of port (20sq.in. per cube)

Headunit: Eclipse CD3200 w/ 80G iPod

Mids/Highs: Rockford T152s (a-pillars), Rockford T162s (doors)

Subwoofers: 1 15" Fi BL Fully Loaded

Wire: All 1/0g Kicker Hyperflex

My YouTube Videos

My Fiberglass A-Pillar Build

My "Seamless" Looking Box Build

My DD1508 T-Line Bandpass Build "Seamless" w/ Acrylic Windows (for '05 TrailBlazer)

My Stealth 8" Fiberglass Build (for '05 TrailBlazer)

My Build For A Friend's '08 Cobalt 15" BL Sealed Off From The Trunk

My feedback/references...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Who's Online   1 Member, 0 Anonymous, 602 Guests (See full list)

×
×
  • Create New...