wL<3bass Posted June 23, 2008 Report Share Posted June 23, 2008 ecspecially considering the gastank is right up against the back seat in the trunk. i've seen this done b4 and its a awesome deal but you will need to get a little more familiar with fiberglass before trying it. Where the armrests are for the rear passengers, inbetween them and the window there is a rather large area that an enclosure can be built into and there is enough room for 2 8's perside. jump in the back seat, look between the bottom of the window and where the armrest panel meets the seat and start invisioning an enclosure behine the panel with grill gloth covered grills. just a thought anyway... I wouldn't have the balls to cut that GTO's interior.... Quote Vehicle: 1997 S10 Blazer 4dr 4X4 Exterior: Rear End Bagged, Black Grill, Lifted 2" Amplifiers: Rockford Fosgate T8004 & T10001bd Batteries: 2 Stinger SPV35, Kinetik HC2400 Electrical: Big 3, DC Power 290amp Alternator w/ MLA at 15.5v Enclosure: 4.2 ft³ @ 33Hz 84sq.in. of port (20sq.in. per cube) Headunit: Eclipse CD3200 w/ 80G iPod Mids/Highs: Rockford T152s (a-pillars), Rockford T162s (doors) Subwoofers: 1 15" Fi BL Fully Loaded Wire: All 1/0g Kicker Hyperflex My YouTube Videos My Fiberglass A-Pillar Build My "Seamless" Looking Box Build My DD1508 T-Line Bandpass Build "Seamless" w/ Acrylic Windows (for '05 TrailBlazer) My Stealth 8" Fiberglass Build (for '05 TrailBlazer) My Build For A Friend's '08 Cobalt 15" BL Sealed Off From The Trunk My feedback/references... Link to comment Share on other sites More sharing options...
eazy Posted June 26, 2008 Author Report Share Posted June 26, 2008 If I build a ported box to sit on the floor in the backseat behind the drivers seat, what directions should I fire the sub and port? Quote 1999 Mercury Grand Marquis LS Build Thread Pioneer DEH-P5000UB (4) Infinity Kappa 682.7CF's Sundown Audio SAE-1000D Sundown Audio SAX-100.4 Fi Q15 with BP power in 4 cubes @ 32Hz (2) Kinetik HC1800's Duralast Gold Group 65 Excessive Amperage 250A alternator Knukonceptz Kolossus 1/0 gauge Elemental Designs eDead v1SE² Link to comment Share on other sites More sharing options...
sundownz Posted June 26, 2008 Report Share Posted June 26, 2008 If you can get them on the same box face (eg: both up) that would work well. Quote - Jacob Fuller - Owner, Sundown Audio - Sundown Audio on FACEBOOK - Please DO NOT PM ME -- use my email address -- [email protected] Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.