jarredondo1999 Posted July 11, 2008 Report Share Posted July 11, 2008 Hello All, Before posting I did do some research about this and this is what I came up with. I am going to build a partial fiberglass box to hold two FI 15' Q, with the speakers facing up and port facing rear. I used a sample spreadsheet that someone here created. Here are some pics. Please let me know if this is correct, since this is my first time building a ported box. I forgot to include bracing, but will be doing some 2"x4" vertical and horizontal to meet in the middle of the box. Thanks in advance, Quote Link to comment Share on other sites More sharing options...
jarredondo1999 Posted July 14, 2008 Author Report Share Posted July 14, 2008 Could anybody help me with this? Any information will be appreciated. Thanks, Quote Link to comment Share on other sites More sharing options...
jarredondo1999 Posted July 28, 2008 Author Report Share Posted July 28, 2008 anyone? Quote Link to comment Share on other sites More sharing options...
Aaron813 Posted July 28, 2008 Report Share Posted July 28, 2008 You will need to take a few pics of the outside of the Tahoe layed the fock out so we can get some ideas Quote Link to comment Share on other sites More sharing options...
Bass4Lyfe Posted July 28, 2008 Report Share Posted July 28, 2008 this isn't my area of expertise (Do i even have one? ) But i'll bump it for someone who knows .... Quote ~Matthew 1998 Toyota Camry XLE V6 3L (1) ScyTek Astra 4000RS-2W-1 2-Way Remote Start Alarm with Shock and Proximity (1) 20% Tint All Around (Gately Audio) (1) 250 Amperage HO Alternator (1) Big 3 Done In 1/0 (2) Kinetik HC2400 Power Cell (1) Alpine IVA-D106 Receiver (1) Peripheral Video Bypass Device (4) Alpine SPS-17C2 Speakers (1) Alpine KCE-422i iPod Control Interface (4) Sheets Dynamat Extreme; for speakers (1) 10 Square Feet Hushmat (Trunk & Rear Deck) (4) DC Audio Level 4 15" D2 Subwoofer w/ Level 5 Coils (1) Wall Built By David, Tuned to 32 Hz (1) Rockford Fosgate T40001bd Amplifier (1) Stinger 1/0 Wiring (2 runs of + 2 runs of -) (1) Stinger Volt Meter Link to comment Share on other sites More sharing options...
EricR Posted July 28, 2008 Report Share Posted July 28, 2008 You will need to take a few pics of the outside of the Tahoe layed the fock out so we can get some ideas lawl. i was thinking the same thing Quote i was thinking leave the 12 sitting in the box in the hole and duck tape from the bottom of the sub to the bottom of the baffle so the sub doesnt free air. would that work? Link to comment Share on other sites More sharing options...
roscoe1129 Posted July 28, 2008 Report Share Posted July 28, 2008 this isn't my area of expertise (Do i even have one? )But i'll bump it for someone who knows .... Tickets my man.... you are now the ticket expert j/p I cant help but mess with ya on that... umm without actually building and measureing ( packing peanuts or something) it is very difficult to actually tell what your airspace is gonna be unless you are making a guestament... Quote Some people need a sympathetic pat... on the head...with my hammer Scientia est Vox "In Nomine Patris et Filii et Spiritus Sancti" DONT BE AFRAID TO USE THE SEARCH BUTTON!!! SMD SUPER BUYER/SELLER Link to comment Share on other sites More sharing options...
WickeD Posted July 28, 2008 Report Share Posted July 28, 2008 lol Quote Link to comment Share on other sites More sharing options...
Big P Posted July 29, 2008 Report Share Posted July 29, 2008 Just build it as large as posible then goto home depot and buy a bunch of pvc pipe. then put it in the port. The keep cutting the pipe down untill you find the proper length then replace the pipe with areo ports. Quote Link to comment Share on other sites More sharing options...
jarredondo1999 Posted July 29, 2008 Author Report Share Posted July 29, 2008 Just build it as large as posible then goto home depot and buy a bunch of pvc pipe. then put it in the port. The keep cutting the pipe down untill you find the proper length then replace the pipe with areo ports. I was hoping to do a square port not areo ports. I may just build it and see what it sounds like with the calculations that I already have or might just do it sealed. Fucc it. Here are some more pics of the truck. Last one with a little photoshop of it black. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.