Bibby's Bagged Fullsize GMC

[bibby>Chode]

Here's a couple pics of the front bags

And It doesn't look like im gonna have in progress over the next few days, as this happened yesterday...

Almost up to my knees in snow.

Couldn't get in the driveway, so i had to park on the street.

Normally a road that fits 2 cars at a time.

The truck and the back of my 92 honda

Thats right, 14 & 1/2" in DFW

[bibby>Chode]

After a few days for the snow to melt and clear up, I was able to get some work done. I pulled the bed back off, hood, grill, and the pass fender and inner fender. It''s valentines day, so it was time to cleanup and take the wifey out for dinner so i had to stop before i got the drivers fender off. I'll yank it off tomorrow. My dad was supposed to be out here tuesday and wednesday to do some wleding, but he is snowed in up north some damn where. He'll be through either this weekend or the next. So im going to be doing everything i can that doesnt require welding.

Pulled into the garage with the bed off, door half shut with the heater running.

Pic of said heater. 55,000 BTU diesel heater FTW

Some pics of the cab

Just playing with a rear bag and mount

The hood is off!

And here is where i didnt take any pics until i was finished.

Grill hood, and pass fender gone. Alos got the wheels off and on jackstands.

Close up of the removed fender side

from the back

Floating

Stack of parts(The inner fenders are trash now)

[bibby>Chode]

So i got up this morning to finish removing the fenders. The drivers side more specifically. It was much easier than the pass side despite all the shit to relocate. This was partly bc I didnt know what i was doing pulling off the pass, and on the drivers side i did. Any-who, I'm about to go to lunch with the wifey, and maybe when i get home yank the springs out and install the front bags. idk, we'll see.

Before we started

Windshield washer fluid resovior out

Here is where i forgot to take pics until we were done again.

Then i slipped the fender back on to see what clearences were gonna be like.

[bibby>Chode]

This update has been a few days coming!

I finally got the front springs shocks, and sway bar off. I was having mad issues with them. withe zero modification, my upper a arms and tie rod ends are hitting. I'm about 6" from laying out in the front. Once i make some notches it should lay then i can start working on the rear. I also painted up my inner fenders. The outside is flat black, and the bottom is rubber undercoating.

without fenders

with fenders

The view underneath

From the front

Without springs and shocks. You can see the a arms and tie rods hitting

Close up of the upper a arms hitting

Close up of the tie rod hitting

My fenders before i started them

Materials

Flat black on top

Finished the top, now working on the bottom

A close up of the bottom

[BeatBox]

so you gonna cut alittle on the frame so that tie rod dont hit?

[bibby>Chode]

Yep, should only take about 2" of a notch.

[lowrthnu92]

The next thing that will hit is the lower a arm hits the lower a arm mounts then the lower a arm hits the frame

[LoudBlazer]

Orgasmic! Im glad I got out of the midwest JUST in time, just sun here in Florida! Get back to work!

[splzx3]

loook good bro

keep the pics comeing

[Guero3384]

Looks good question why didnt you go with brackets behind axel instead over axel if not mistaken you would go lower with axels behind axel.....