07sOnAtA sp.ed Posted September 15, 2008 Report Posted September 15, 2008 Why do some people put components in the front, and coaxials in the rear of the cars. I thought that components were superior in every way, but then it would make sense why some people do this. If anyone know why, plz inform me. im headed to class right now, so if i dont reply for a while, just keep posting plz. all advice or inquiries welcome. thx in advance CURRENTLY UNDER RE-CONSTRUCTION 2008 Hyundai Sonata Team T3 Audio Team Deadly Hertz Team SMD (Street Motivated Devastation)
ALPINE408 Posted September 15, 2008 Report Posted September 15, 2008 Beçause back spèakers are just rear fill or for peeps in the back seat you really dont need back speakers with a good front stage unless you like the concert effect Have you ever had your woofers blown?
raytard Posted September 15, 2008 Report Posted September 15, 2008 theyre cheaper than the comparable components, and you're really hard pressed to tell a difference from the front seat, I can't even tell if the backs are on or off in my car most of the time Build: http://www.stevemeadedesigns.com/board/ind...hl=avalon+build monster/rockford/kicker/stinger cables, pioneer source, jbl highs/amps, kinetik/shuriken batts, iraggi alt, dei security, dc subs(atleast for now) Team DC
MTX J30 Posted September 15, 2008 Report Posted September 15, 2008 theyre cheaper than the comparable components, and you're really hard pressed to tell a difference from the front seat, I can't even tell if the backs are on or off in my car most of the time b/c my front and back components are different sizes i had to put the better ones in the back. does it make that much of a difference if the better ones are in the back Once or twice I have missed having a back seat / rear hatch, but all in all people love to see a walled vehcile. It just screams "i'm not fucking around with my setup, im loud"
wL<3bass Posted September 15, 2008 Report Posted September 15, 2008 b/c my front and back components are different sizes i had to put the better ones in the back. does it make that much of a difference if the better ones are in the back Yes.....your "better" components should be in the front. Vehicle: 1997 S10 Blazer 4dr 4X4 Exterior: Rear End Bagged, Black Grill, Lifted 2" Amplifiers: Rockford Fosgate T8004 & T10001bd Batteries: 2 Stinger SPV35, Kinetik HC2400 Electrical: Big 3, DC Power 290amp Alternator w/ MLA at 15.5v Enclosure: 4.2 ft³ @ 33Hz 84sq.in. of port (20sq.in. per cube) Headunit: Eclipse CD3200 w/ 80G iPod Mids/Highs: Rockford T152s (a-pillars), Rockford T162s (doors) Subwoofers: 1 15" Fi BL Fully Loaded Wire: All 1/0g Kicker Hyperflex My YouTube Videos My Fiberglass A-Pillar Build My "Seamless" Looking Box Build My DD1508 T-Line Bandpass Build "Seamless" w/ Acrylic Windows (for '05 TrailBlazer) My Stealth 8" Fiberglass Build (for '05 TrailBlazer) My Build For A Friend's '08 Cobalt 15" BL Sealed Off From The Trunk My feedback/references...
MTX J30 Posted September 15, 2008 Report Posted September 15, 2008 Yes.....your "better" components should be in the front. what if there wattage difference is only like 50 watts. Once or twice I have missed having a back seat / rear hatch, but all in all people love to see a walled vehcile. It just screams "i'm not fucking around with my setup, im loud"
Recommended Posts
Archived
This topic is now archived and is closed to further replies.