Jump to content

Recommended Posts

Mine is are 8000k in my sig....and to remove scratches use 2000grit sandpaper and buff them and they look like new :)

Vehicle: 1997 S10 Blazer 4dr 4X4

Exterior: Rear End Bagged, Black Grill, Lifted 2"

Amplifiers: Rockford Fosgate T8004 & T10001bd

Batteries: 2 Stinger SPV35, Kinetik HC2400

Electrical: Big 3, DC Power 290amp Alternator w/ MLA at 15.5v

Enclosure: 4.2 ft³ @ 33Hz 84sq.in. of port (20sq.in. per cube)

Headunit: Eclipse CD3200 w/ 80G iPod

Mids/Highs: Rockford T152s (a-pillars), Rockford T162s (doors)

Subwoofers: 1 15" Fi BL Fully Loaded

Wire: All 1/0g Kicker Hyperflex

My YouTube Videos

My Fiberglass A-Pillar Build

My "Seamless" Looking Box Build

My DD1508 T-Line Bandpass Build "Seamless" w/ Acrylic Windows (for '05 TrailBlazer)

My Stealth 8" Fiberglass Build (for '05 TrailBlazer)

My Build For A Friend's '08 Cobalt 15" BL Sealed Off From The Trunk

My feedback/references...

Link to comment
Share on other sites

there just clear white lookin in the pics but in person there a real bright blueish white look, what ive been lookin for, and the 2000grit sandpaper prolly will work better but its hard to manover around those lil tips on the headlight were the molded it when it was made, can u sand those down i mean there not there for a reason other than what the factory done to em right?

here's a link to my system 99 toyota tacoma , 2 mtx 8000 1504's in a sealed downfire , 1000w memphis amp

here's a link to my other system my 90 geo prizm test car

heres a thread i got of new songs u can dl that are legal = Some Good Bangage/you Can Dl These Free And Legit

redblob.gifbouncing%20blob.gif2yooj7m.pngmodel14.gif

Link to comment
Share on other sites

and i dont need projectors cause the beam is already focused from the refelctor headlight houseing and it goes behind a thing to keep it from glareing so im all good lol

wall shot plz

you can cook bacon shirtless if you're not a pussy...lol

not hatin, but am i wrong here it looks as if the amp is not grounded its hooked directly to the battery. it that the way it should be.

intr.jpg

DC.jpgDC POWER

Link to comment
Share on other sites

there just clear white lookin in the pics but in person there a real bright blueish white look, what ive been lookin for, and the 2000grit sandpaper prolly will work better but its hard to manover around those lil tips on the headlight were the molded it when it was made, can u sand those down i mean there not there for a reason other than what the factory done to em right?

those tips are for headlight alignment things that mounts on those..

Link to comment
Share on other sites

Man I ordered an HID kit off of eBay for my 4 Runner, 8000K H4/9003 low beam for like 85 bucks came with everything brand new in the box, but when I hooked them up nothing worked......pm me some directions to that place you got yours ima have to take a trip and see them...

1997 4 Runner

Alpine CDA-9886

4 Fi Audio X Series 12's

1 Crunch GP3000D Pro

DC Power Inc. Alternator(Kickin out 15+ volts!)

footer-fade.gif

Link to comment
Share on other sites

Man I ordered an HID kit off of eBay for my 4 Runner, 8000K H4/9003 low beam for like 85 bucks came with everything brand new in the box, but when I hooked them up nothing worked......pm me some directions to that place you got yours ima have to take a trip and see them...

What brand was the kit..or who did you order from.

Link to comment
Share on other sites

Holy shit, someone else from HKY? Fucking nice!

Where you livin? When I come home, I live right off Sandy Ridge...

'03 Ford Explorer XLT

24s

Dem 24s? Nah nigga dem 10s - Earthman
Link to comment
Share on other sites

Not trying to hijack the thread, but it looks like we gonna have a lot of peoples reppin' SMD in Hickory! Guess we're gonna have to ride up to Asheville sometime and show them boys up on Patton what's up...

'03 Ford Explorer XLT

24s

Dem 24s? Nah nigga dem 10s - Earthman
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Who's Online   0 Members, 0 Anonymous, 837 Guests (See full list)

    • There are no registered users currently online
×
×
  • Create New...