jmfrb1 Posted August 19, 2013 Report Posted August 19, 2013 sweet man. gonna recone one of my blown pos woofers just for giggles to get some practice in before one of the good ones needs a recone. these step by step instructions should help out a lot!
Jerry Fang Posted November 2, 2014 Report Posted November 2, 2014 I'd recently recone my SA8v2 and that shit was a pain in the butt to recone. Everything was limited space, tinsel lead are very tight on the basket, the ring that mount the spider to the basket was a very tight fit, but I manage to recone it. Sound great after the recone.
Subwoofer Stokes Posted November 19, 2015 Report Posted November 19, 2015 Is there a topic on how to glue the triple joint? Or anything about assembling the recone? <p>Black 1997 Chevy C1500 Ext. Cab5.7L 350 VortecDual 22" Glasspack ExhaustRacing Chip/Programmer.373 Gears W/ Shift KitCold Air IntakePioneer Deh80-PrsSubwoofers-Fi Q motor, 18 6 spoke basket, SPL Audio recone
Brandon Scobee Posted December 1, 2015 Report Posted December 1, 2015 What brand of CA glue and activator did you use? Also do you spray the basket with the activator then apply the glue or the other way around? What did you use for the shims? I'm about to recone some subs and this helps me a lot! Thanks for the great tutorial! I just use the house brand from a local RC hobby shop. I apply the glue to the basket and the activator to the cone / spider. The shims are manila folders cut up to fit the coil. took 3 layers for a nice tight fit all around.
BassMunky Posted June 6, 2018 Report Posted June 6, 2018 rajahh Shakin not Stirred....my buildhttp://www.stevemead...ngle-cab-build/412 CVX And put a sealed enclosure in your trunk cut a hole in your deck and call it ported
Recommended Posts
Archived
This topic is now archived and is closed to further replies.