sayhuh? Posted December 7, 2008 Report Posted December 7, 2008 of rca's? Bought a JVC in dash 7" dvd player avx-710...it only has one set of rca's. What can I use to still get front rear and/or sub outs w/o using the speaker wire (unless thats the best way to go)? Also..how the f do you hook up fiber optics on car stereo for DTS??? haha never seen it before. (been out the game for quite some time) Thanks to all Quote Blown
now534 Posted December 8, 2008 Report Posted December 8, 2008 you could use a rca y splitter cable you may lose sound quality a little but its better than cutting speaker wires Quote
ChevyBoy Posted December 8, 2008 Report Posted December 8, 2008 why not just use the preouts on the amps? Quote
now534 Posted December 8, 2008 Report Posted December 8, 2008 or that too i forgot amps had outputs too i have yet to use mine since im only running one amp though. but you could do what chevy said if you don't want to use splitters. Quote
sayhuh? Posted December 8, 2008 Author Report Posted December 8, 2008 Yea, but with only one set of rca's from the deck how can I use the outputs of the amps w/o using a 'y'...use an EQ?? Quote Blown
ChevyBoy Posted December 9, 2008 Report Posted December 9, 2008 Yea, but with only one set of rca's from the deck how can I use the outputs of the amps w/o using a 'y'...use an EQ?? did you not read my post? just use the preouts on the amp/amps to go to other amp/amps Quote
now534 Posted December 9, 2008 Report Posted December 9, 2008 have the preout from the deck go to the input on the amp then on the amp there will be a output for another amp so on and so forth Quote
uhoh_45 Posted December 9, 2008 Report Posted December 9, 2008 could always get some line out converters and turn your speaker wire into rcas Quote R.I.P! (Nov-29-2009) 92 explorer - 4 Atomic Apxx 15s duel .7s - 4rth order bandpass wall -4 powerbass XA-3000D's - 16 8volt batts wired to 16 volts - (9+/9-) runs 0gauge - 152.3 Db @ 29hz BUILD LOG current build 97 chevy lumina4 - 1 Atomic Apx 18 - 6 cube slot port trunk sealed off - 1 powerbass XA-3000D - 2 optima G31s in spare tire18 1 run 1/0 lumina build log
ChevyBoy Posted December 9, 2008 Report Posted December 9, 2008 could always get some line out converters and turn your speaker wire into rcas or just save money and hook it up like i said. hell, youre taking a chance going through your speakers with not getting the correct frequency. Quote
sayhuh? Posted December 9, 2008 Author Report Posted December 9, 2008 did you not read my post? just use the preouts on the amp/amps to go to other amp/amps ok, maybe I'm not looking at this right then, but if you have one set of RCA's coming out the deck and it goes into either a mono or 4 channel amp and these amps only have one output, wouldn't you still need a splitter? deck to mono, mono output to 4 channel...still need a splitter for the 4 channels (unless you want to run it 2 channel, which I don't). Deck to 4 channel...still the same problem...yes I can output to the mono with no probs, but still not wanting my mids at 2 channel. This is what I'm trying to get past...Speaker wire also not an option. Which is why I ask if an audio control three.1 or something would be my fix (EQ with line driver) or buy a different deck, but teh wifey would kill me Not being a pain(i hope)..just want my 4 channel as a four channel...then again...I may be looking at it all wrong. mental pictures are > me ( a lot) =D Quote Blown
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.