Namosh Posted August 13, 2009 Author Report Share Posted August 13, 2009 Alright, well fuck that! DC's going back in. I cut the front chamber down just as an experiment and put it back in and it's just as loud without taking up as much of the bed. Got something else in mind when I can swing it.....stay tuned. My Ram Quad Cab Blow-through Link to comment Share on other sites More sharing options...
monoxide Posted October 18, 2009 Report Share Posted October 18, 2009 thats nice. i want to do a blow through but cant bring my self to cut a hole in the cab. lol Link to comment Share on other sites More sharing options...
Namosh Posted November 17, 2009 Author Report Share Posted November 17, 2009 Well, I've been wanting to try doing a t-line so time for a new box. This one isn't very pretty now...I will probably clean it up a little this winter. Just wanted to see how it performed first. Little extra support around the blow-through mouth I didn't take the DC's out of my truck until the box was done so I used a T1 to make sure it could be mounted in such a tight space. My Ram Quad Cab Blow-through Link to comment Share on other sites More sharing options...
Namosh Posted November 17, 2009 Author Report Share Posted November 17, 2009 Starting on one side of one line. My Ram Quad Cab Blow-through Link to comment Share on other sites More sharing options...
jack Posted November 17, 2009 Report Share Posted November 17, 2009 all fun and games till you need to get to those back screws. let me knoe how that one turns out http://www.stevemeadedesigns.com/board/ind...showtopic=29213 "sleeper build" (1) DC AUDIO Level4XL 10 (2) PowermasterD2700 batteries ALL FOR SALE TEAM DC AUDIO TEAM DIRTFLOORPOOR Link to comment Share on other sites More sharing options...
Namosh Posted November 17, 2009 Author Report Share Posted November 17, 2009 This time the port has to be slid in after the box is already in the bed...then the subs....it's a VERY tight fit. Anyway, making the new port. Second line wall. Then I needed to finish the base. Re-enforcing the port with fiberglass and some half inch pipe. My Ram Quad Cab Blow-through Link to comment Share on other sites More sharing options...
mhuck123 Posted November 17, 2009 Report Share Posted November 17, 2009 Gorrilla glue FTW!!! I love that stuff, I had a TV that the mount kept breaking from the bass so I used the gorilla and never again! Starting From Scratch!! Link to comment Share on other sites More sharing options...
Namosh Posted November 17, 2009 Author Report Share Posted November 17, 2009 Sides and center divider in I originally was going to make smooth curves but I decided to just do 45's. My Ram Quad Cab Blow-through Link to comment Share on other sites More sharing options...
Namosh Posted November 17, 2009 Author Report Share Posted November 17, 2009 OK...That was the easy part. Now switching boxes. Box in place and port slid through and screwed down. Weatherstripping around the hole and around the access panel. One sub in My Ram Quad Cab Blow-through Link to comment Share on other sites More sharing options...
Namosh Posted November 17, 2009 Author Report Share Posted November 17, 2009 Sub number two. Did I mention it is a tight fit? Access panel back on . Almost no bed left. That's it. My Ram Quad Cab Blow-through Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.