oldschoolboomer Posted December 17, 2008 Report Posted December 17, 2008 I have 6 se15d4's and 2 hk4000d's to run them. vehicle is 03 silverado ext. cab. plan to wall it with @3.6 net per sub tuned to 35Hz. Three subs per amp running 2.66 ohms per amp. Not sure what the hk's do at 2.66, but will this be too much power?
Decaf Posted December 17, 2008 Report Posted December 17, 2008 r u crazy? lol holy power for some re se's the 15s only need 750 to shine, and thats pushing it, and ull be giving them at least ~833w (2500w/3), just my guess, and thats on 12v, if you have no voltage drop and sit around 14v u are look at close to 1000w a piece if u must, keep the enclosure a bit on the small side to help power handling id say thats overkill imho goodluck tho... love me some se's.... mmmm. woofer porn
RamenNoodles Posted December 17, 2008 Report Posted December 17, 2008 why not just run them off 1 hk4000 at 1 ohm? Diablo Audio Technologies Fi Car Audio Ascendant Audio
Slinky Posted December 17, 2008 Report Posted December 17, 2008 why not just run them off 1 hk4000 at 1 ohm? cuz its fun to push your equipment to get the most out of it DD M4 Rockford Fosgate P500-4 SoundQubed HDC415 w carbon fiber cap 2 Rockford Fosagate T1675-S XS Power D3400 Under Hood XS Power D5100 in rear Michael Singer 200A Alt Build Log: http://www.stevemeadedesigns.com/board/topic/153901-2012-veloster-update-842013-wall-build-4-15s/
Decaf Posted December 17, 2008 Report Posted December 17, 2008 hmmm... series/parallel should yeild 1.33ohms.... might be able to get away with that with box rise
oldschoolboomer Posted December 17, 2008 Author Report Posted December 17, 2008 so should i just use 4 of the se's and 1 of the hk's? Or just go for it with what I have.
Recommended Posts
Archived
This topic is now archived and is closed to further replies.