krazo_eg6 Posted January 9, 2009 Report Share Posted January 9, 2009 I might be wrong but is there a piece from directed used for remote starts that you can make learn your keys that he can wire up so the car can use regular keys??? Quote Link to comment Share on other sites More sharing options...
Stephen Posted January 9, 2009 Report Share Posted January 9, 2009 Programming Additional Keys. Must have 2 Existing Pre-Programmed Keys. 1. Insert one of the pre-programmed transponder keys into the ignition lock cylinder and turn the switch to the ON position. 2. The key should remain in the ON position for 5 seconds but not more then 15 seconds before you turn it back to the OFF position. 3. Within 10 seconds, insert the second pre-programed transponder key into the ignition lock cylinder and turn the switch to the ON position. The VTSS(Vehicle Theft Security System) or Sentry Key Immobilizer System lamp (depending on model ) should start to flash. This along with a audible tone will indicate to you that the system has entered the "Customer Learn" programming mode. 4. Within 45 seconds, turn the switch to the OFF position. Insert the new transponder key and turn the switch to the ON position. After approximately 10 seconds an audible tone will sound and the Indicator lamp will stay illuminated for 3 seconds. This will be your acknowledgement that you have successfully programmed in the new transponder key. 5. To add additional keys, repeat steps 1 through 4. 2 PROGRAMMED KEYS MAY BE REQUIRED FOR SELF PROGRAMMING, PLEASE CHECK YOUR OWNERS MANUAL OR LOCAL DEALERSHIP FOR THESE DETAILS. Quote you can cook bacon shirtless if you're not a pussy...lol not hatin, but am i wrong here it looks as if the amp is not grounded its hooked directly to the battery. it that the way it should be. DC POWER Link to comment Share on other sites More sharing options...
99vic Posted January 9, 2009 Author Report Share Posted January 9, 2009 did you try holding the original right against the ignition while using the spare key?? i tried putting the key in different locations and it still died. I might be wrong but is there a piece from directed used for remote starts that you can make learn your keys that he can wire up so the car can use regular keys??? i was looking around but found nothing. i may have missed it. Programming Additional Keys.Must have 2 Existing Pre-Programmed Keys. 1. Insert one of the pre-programmed transponder keys into the ignition lock cylinder and turn the switch to the ON position. 2. The key should remain in the ON position for 5 seconds but not more then 15 seconds before you turn it back to the OFF position. 3. Within 10 seconds, insert the second pre-programed transponder key into the ignition lock cylinder and turn the switch to the ON position. The VTSS(Vehicle Theft Security System) or Sentry Key Immobilizer System lamp (depending on model ) should start to flash. This along with a audible tone will indicate to you that the system has entered the "Customer Learn" programming mode. 4. Within 45 seconds, turn the switch to the OFF position. Insert the new transponder key and turn the switch to the ON position. After approximately 10 seconds an audible tone will sound and the Indicator lamp will stay illuminated for 3 seconds. This will be your acknowledgement that you have successfully programmed in the new transponder key. 5. To add additional keys, repeat steps 1 through 4. 2 PROGRAMMED KEYS MAY BE REQUIRED FOR SELF PROGRAMMING, PLEASE CHECK YOUR OWNERS MANUAL OR LOCAL DEALERSHIP FOR THESE DETAILS. my problem is that i only have one key. looks like im going to have to get one from a dealer when i get some cash well ill probably get the key from ebay its like 10-15 on there rather than 90 from the dealer. Quote REST IN PARADISE BIG RICH (Sqmonte) never forgotten Why do you guys ALWAYS dispute on NUMBERS????? It's such a played out argument, so fucking annoying.... It's 12 fuckin 15's.... It's louder than you... Shut the fuck up... /Rant I'm so jealous, it makes me want to club baby seals. That shit gets down HARD!dont buy from knowledge he will scam you. http://www.stevemeadedesigns.com/board/topic/30995-official-knowledge-feedback/ Link to comment Share on other sites More sharing options...
G_Fresh Posted January 9, 2009 Report Share Posted January 9, 2009 I have a 97 lumina. Chevy wanted to charge me 40$. The guy basically told me all he does is put it in a machine, and it's done 1 min later. Quote Link to comment Share on other sites More sharing options...
zacht214 Posted January 9, 2009 Report Share Posted January 9, 2009 (edited) i was reading this and depending on what generation PATS system you have u need either one or 2 keys. here check it out http://www.simple-talk.com/community/blogs...08/30/1906.aspx also maybe a lock smith might be able to do it Edited January 9, 2009 by zacht214 Quote 2 15 RE SE 1 Audiopipe 1500d Sony HU Batcap 800 in the back Team Tex~Flex Link to comment Share on other sites More sharing options...
wildbeast15 Posted January 10, 2009 Report Share Posted January 10, 2009 i payed 30 bucks from my dealer to get keys from my explorer..... Quote The set up your talking about would sound great in my Tahoe. Trade you my dog for it. He has one eye but that only makes for bad depth perception so hey so what if he is running into shit, look at it this way he is easy to sneak up ninja style on. (right side only)</div> Link to comment Share on other sites More sharing options...
99vic Posted January 10, 2009 Author Report Share Posted January 10, 2009 (edited) i was reading this and depending on what generation PATS system you have u need either one or 2 keys. here check it out http://www.simple-talk.com/community/blogs...08/30/1906.aspx also maybe a lock smith might be able to do itsounds interesting im going to have to figure out if i have the pats or pats 2 in my neon and hope its the first lol. i payed 30 bucks from my dealer to get keys from my explorer..... took it to the dealer today and they said all ssid and done it would be 175 Edited January 10, 2009 by 99vic Quote REST IN PARADISE BIG RICH (Sqmonte) never forgotten Why do you guys ALWAYS dispute on NUMBERS????? It's such a played out argument, so fucking annoying.... It's 12 fuckin 15's.... It's louder than you... Shut the fuck up... /Rant I'm so jealous, it makes me want to club baby seals. That shit gets down HARD!dont buy from knowledge he will scam you. http://www.stevemeadedesigns.com/board/topic/30995-official-knowledge-feedback/ Link to comment Share on other sites More sharing options...
99vic Posted January 10, 2009 Author Report Share Posted January 10, 2009 what do u guys think about this one http://cgi.ebay.com/ebaymotors/_Car-Truck-...%3A1|240%3A1318 i was thinking i could buy the key from here and have it cut at the hardware store and pay the dealer later to program it if i cant with the instructions. Quote REST IN PARADISE BIG RICH (Sqmonte) never forgotten Why do you guys ALWAYS dispute on NUMBERS????? It's such a played out argument, so fucking annoying.... It's 12 fuckin 15's.... It's louder than you... Shut the fuck up... /Rant I'm so jealous, it makes me want to club baby seals. That shit gets down HARD!dont buy from knowledge he will scam you. http://www.stevemeadedesigns.com/board/topic/30995-official-knowledge-feedback/ Link to comment Share on other sites More sharing options...
Shyne151 Posted January 11, 2009 Report Share Posted January 11, 2009 Programming Additional Keys.Must have 2 Existing Pre-Programmed Keys. 1. Insert one of the pre-programmed transponder keys into the ignition lock cylinder and turn the switch to the ON position. 2. The key should remain in the ON position for 5 seconds but not more then 15 seconds before you turn it back to the OFF position. 3. Within 10 seconds, insert the second pre-programed transponder key into the ignition lock cylinder and turn the switch to the ON position. The VTSS(Vehicle Theft Security System) or Sentry Key Immobilizer System lamp (depending on model ) should start to flash. This along with a audible tone will indicate to you that the system has entered the "Customer Learn" programming mode. 4. Within 45 seconds, turn the switch to the OFF position. Insert the new transponder key and turn the switch to the ON position. After approximately 10 seconds an audible tone will sound and the Indicator lamp will stay illuminated for 3 seconds. This will be your acknowledgement that you have successfully programmed in the new transponder key. 5. To add additional keys, repeat steps 1 through 4. 2 PROGRAMMED KEYS MAY BE REQUIRED FOR SELF PROGRAMMING, PLEASE CHECK YOUR OWNERS MANUAL OR LOCAL DEALERSHIP FOR THESE DETAILS. ^^^ That is 100% correct. It's how I program in all chrysler transponder/dummy keys. Quote -Installer for Duke's Car Stereo 2000 Pontiac Grand Prix - Ported Eaton M90 S/C, 3.5" pulley, XS Power Headers, 1.9 Rockers, FWI, Poly Motor Mounts, Custom Tune. RF T1000-1bdCP and T400-4 Boston Acoustics SPG 555 Kenwood eXcelon 995 RF Punch 6.5" components and MB Quart Premium 6x9"s Powermaster Alternator, YellowTop D34, Vmax CT1000 Link to comment Share on other sites More sharing options...
99vic Posted January 11, 2009 Author Report Share Posted January 11, 2009 ^^^That is 100% correct. It's how I program in all chrysler transponder/dummy keys. so it will work with one key being that dodge and chrysler are the same? Quote REST IN PARADISE BIG RICH (Sqmonte) never forgotten Why do you guys ALWAYS dispute on NUMBERS????? It's such a played out argument, so fucking annoying.... It's 12 fuckin 15's.... It's louder than you... Shut the fuck up... /Rant I'm so jealous, it makes me want to club baby seals. That shit gets down HARD!dont buy from knowledge he will scam you. http://www.stevemeadedesigns.com/board/topic/30995-official-knowledge-feedback/ Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.