xx24xx Posted February 20, 2009 Report Posted February 20, 2009 Eclpise 3200 or the new 5030 for a bit more money. Both have 5v. Quote lP lR O Jl lE C T - C G 6 DD 9512G - DD M2A - DDA W - DD S4A - ALPINE W505 - IMPRINT
wL<3bass Posted February 20, 2009 Report Posted February 20, 2009 Eclipse 3200 or http://www.onlinecarstereo.com/CarAudio/Pr...ProductID=18795 Quote Vehicle: 1997 S10 Blazer 4dr 4X4 Exterior: Rear End Bagged, Black Grill, Lifted 2" Amplifiers: Rockford Fosgate T8004 & T10001bd Batteries: 2 Stinger SPV35, Kinetik HC2400 Electrical: Big 3, DC Power 290amp Alternator w/ MLA at 15.5v Enclosure: 4.2 ft³ @ 33Hz 84sq.in. of port (20sq.in. per cube) Headunit: Eclipse CD3200 w/ 80G iPod Mids/Highs: Rockford T152s (a-pillars), Rockford T162s (doors) Subwoofers: 1 15" Fi BL Fully Loaded Wire: All 1/0g Kicker Hyperflex My YouTube Videos My Fiberglass A-Pillar Build My "Seamless" Looking Box Build My DD1508 T-Line Bandpass Build "Seamless" w/ Acrylic Windows (for '05 TrailBlazer) My Stealth 8" Fiberglass Build (for '05 TrailBlazer) My Build For A Friend's '08 Cobalt 15" BL Sealed Off From The Trunk My feedback/references...
Foxmetalfab1 Posted December 25, 2019 Report Posted December 25, 2019 Did you ever find a head unit? I am here to tell ALL of you that the pre out voltage of your head unit TOTALLY MATTERS!!!! If you think your stereo sounds good now, plug in an 8v or 6v pre out head unit and be BLOWN AWAY!!! The difference is so huge it’s unexplainable. Anyone who sais any different is inexperienced in the “EXPERIENCE”. Good luck out there. Coming from a guy that can’t afford a BAD ASS deck, “When buying a deck, spend the extra money, choose wisely. You won’t be disappointed.” Quote
CstrokerV Posted December 25, 2019 Report Posted December 25, 2019 On 2/5/2009 at 3:25 PM, Guest digitalboy said: Just because your amp CAN take 6v preouts. doesn't mean it matters. To be honest, between 2v and 8v preouts i have not heard a difference between the two, as long as the gain is set right. its not about the sound you hear its about the amp working harder in a sense On 2/5/2009 at 4:16 PM, Zade08 said: Already condidered a line driver but was told that if amplify a 4volt shitty signal to a 6volt signal you still have a shitty signal... two things with this if you have a shitty 6volt signal the same thing lol and if the 4volt is clean so will the it be when its boosted to 6 Quote my build http://www.stevemeadedesigns.com/board/topic/142505-small-build-log-4-dc-lvl3-10s-tl-update-link-to-rebuild/ http://www.stevemeadedesigns.com/board/topic/154258-rebuild-6-lvl3-12s-update-small-video-nothing-spectacular/ new build http://www.stevemeadedesigns.com/board/topic/188181-03-trailblazer-slow-build-8-dc-lvl3-12-m1-motor-m2-parts/
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.