Airborne Posted February 18, 2009 Report Share Posted February 18, 2009 Sounds like I will go check out the ones at autozone, I was going to order the side post adapter from Darvex, same one I have right now, but sounds like the autozone one is a bit bigger. Should I heat wrap any of the wire? I heat shrink everything. Mostly because I had a hook up lol but it turned out to be a life saver when a shitty crimp(I know) was giving way. Quote Link to comment Share on other sites More sharing options...
andywmu Posted February 19, 2009 Author Report Share Posted February 19, 2009 I plan on soldering all my wire terminals. Might use 0 gauge clips to hold the wire around the frame on the front of the car, and keep it away from the motor. Quote 15" Fi BL Ported 4.0 cu ft. Sundown 1500d Full 1/0 Gauge Throughout Big 3 Link to comment Share on other sites More sharing options...
LoudBlazer Posted February 19, 2009 Report Share Posted February 19, 2009 Ill get you a pic of mine tomorrow. Whats your email (pm me it) Quote 1997 2 Door Blazer Bagged & Body Dropped SBC/TH350 Link to comment Share on other sites More sharing options...
andywmu Posted February 19, 2009 Author Report Share Posted February 19, 2009 pm sent. Quote 15" Fi BL Ported 4.0 cu ft. Sundown 1500d Full 1/0 Gauge Throughout Big 3 Link to comment Share on other sites More sharing options...
darvex Posted February 19, 2009 Report Share Posted February 19, 2009 Sounds like I will go check out the ones at autozone, I was going to order the side post adapter from Darvex, same one I have right now, but sounds like the autozone one is a bit bigger. Should I heat wrap any of the wire? Here's an extended length terminal you might keep in mind. We carry the standard length post also. GM Extended Length Post Another cool option. GM Battery Terminal Kit Heat Shrink In All Sizes Quote Link to comment Share on other sites More sharing options...
andywmu Posted February 19, 2009 Author Report Share Posted February 19, 2009 the extended post would work if I were to put washers in place if I needed to right? I'm trying to find a terminal with all 0 gauge acceptance. \ Quote 15" Fi BL Ported 4.0 cu ft. Sundown 1500d Full 1/0 Gauge Throughout Big 3 Link to comment Share on other sites More sharing options...
darvex Posted February 19, 2009 Report Share Posted February 19, 2009 the extended post would work if I were to put washers in place if I needed to right?I'm trying to find a terminal with all 0 gauge acceptance. \ Are you going to have any of the factory wiring harness used? Also, are you using crimp or "pro" style 0 gauge terminals? I'm out for night, I'll check back in the morning. Quote Link to comment Share on other sites More sharing options...
andywmu Posted February 19, 2009 Author Report Share Posted February 19, 2009 I'm just going to add onto the stock wire. And using crimp style and going to solder them Quote 15" Fi BL Ported 4.0 cu ft. Sundown 1500d Full 1/0 Gauge Throughout Big 3 Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.