kickerman Posted February 7, 2007 Report Posted February 7, 2007 the magnets inside the box or outside? Quote 18" mmats juggernaut rf t10001bd alpine h/u
F N LO Posted February 7, 2007 Report Posted February 7, 2007 doesnt it depend what enclosure/air space is provided?? Quote
Ernesto Posted February 7, 2007 Report Posted February 7, 2007 I always keep mine inside but from what I have seen it doesn't really matter... Inverting your subs is mainly for looks and so you don't have to deduct sub displacement from the box. Quote
Chode69 Posted February 7, 2007 Report Posted February 7, 2007 ive always heard for performance keep the magnets in for show inverted is nice. some people have pulled off both performance and show inverting them and it looked and sounded great. like F N LO said it depends on how the set up is as well Quote NoFearX18 said: Nick will bang just about anything.....LMAO....pun intended On 4/13/2010 at 9:51 AM, meade916 said: i was like DAMN, Chode is hardcore! he makes james look like a friendly person LOL! trainman0978 said: I dont know who is worse with the buttholes Chode or Big P... Team Deadly Hertz / Team DC Audio / Team XS Power 2010 DC AUDIO MEMBER OF THE YEAR!!! DuckretaryFEAR THE DUCK Durangho Chodes Blowthrough Build Youtube vids Muh Wife Need DC Audio? Hit me up for pricing!!!
F N LO Posted February 7, 2007 Report Posted February 7, 2007 If your tight for space and want to do a small sealed design i know the magnetout works well, and takes up very little room,or of course you can go ported, but if you have room to do ported put the magnets in.. IMO.... It all depends on what you have to work with Quote
dmanson Posted February 8, 2007 Report Posted February 8, 2007 keep the magnets on the inside bro. Quote 2-DC 15XLM2 D.7s 1-DC 5K amp (1) XS Power D6500(UNDERHOOD) and (1) XS3000(REAR) 3 runs 1/0ga for power and 2 runs of 1/0ga for negative. (2)-RFT165s components, ...... 4 separate 1 inch tweetersRF T600-2(fronts) Punch 450.4(rear) Audiocontrol 3.1. DC power 260amp alternator w/MLA Module
kickerman Posted February 8, 2007 Author Report Posted February 8, 2007 i like the look of the magnet on the outside but if inside is louder than inside it is. what if one was on the outside and one was in the inside? would they fight eachother? Quote 18" mmats juggernaut rf t10001bd alpine h/u
sean 371 Posted February 8, 2007 Report Posted February 8, 2007 i like the look of the magnet on the outside but if inside is louder than inside it is. what if one was on the outside and one was in the inside? would they fight eachother? No just wire them in opposite phase. So that ones not going in while the other's going out. With subs, phasing usually isnt a huge deal, so just make sure theyre opposite, or else they will fight. In case thats not making sense, switch the positive and negative wires on the inverted sub. Quote A couple links to some box builds: Tahoe Box 1, Tahoe Box 2, Nissan Titan, VW GTI, Mini-Bump, Hummer H2, Ford F-150 My own car builds (current setup --- under construction): Overall Thread, Kickpods, Dash, Back Doors Subwoofer Wall
F N LO Posted February 8, 2007 Report Posted February 8, 2007 i like the look of the magnet on the outside but if inside is louder than inside it is. what if one was on the outside and one was in the inside? would they fight eachother? No just wire them in opposite phase. So that ones not going in while the other's going out. With subs, phasing usually isnt a huge deal, so just make sure theyre opposite, or else they will fight. In case thats not making sense, switch the positive and negative wires on the inverted sub. unless of course the box is divided into 2 parts and each sub is using its own airspace... Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.