Mostar Posted February 25, 2009 Report Posted February 25, 2009 I just put in two D1 FL 18" btls, powered by an SAZ3kD...I matched the gain to the HU with my DMM and even set it a little low just to be safe. Well the problem is that the sub on the left almost sounds as if it is bottoming out, and the other one is just fine. I set the gain back even more and it still does it. does any one have a suggestion on what could be causing this to happen? thanks... Quote '05 GMC Envoy H/U: PIONEER AVH P4300DVD Subs: ( SA-12's Amps: (2) SAZ3500d's MECHMAN 270A Alt and 5 Batteries with lots of 1/0
Punkeyboozter Posted February 25, 2009 Report Posted February 25, 2009 I just put in two D1 FL 18" btls, powered by an SAZ3kD...I matched the gain to the HU with my DMM and even set it a little low just to be safe. Well the problem is that the sub on the left almost sounds as if it is bottoming out, and the other one is just fine. I set the gain back even more and it still does it. does any one have a suggestion on what could be causing this to happen? thanks... check your wiring. Quote Loudness is no substitute for musicianship, and partial deafness is no badge of honor. I was once able to hear this advice. Build Log>>> http://www.stevemeadedesigns.com/board/ind...pid=672024& New Build Believe in the order
Mostar Posted February 25, 2009 Author Report Posted February 25, 2009 check your wiring. i checked it and i have both subs wired to 1ohm and i used both sets of terminals on the amp... Quote '05 GMC Envoy H/U: PIONEER AVH P4300DVD Subs: ( SA-12's Amps: (2) SAZ3500d's MECHMAN 270A Alt and 5 Batteries with lots of 1/0
EricM9104 Posted February 25, 2009 Report Posted February 25, 2009 (edited) hooray... errr.... is each sub series wired than paralleled to the amp?? Edited February 25, 2009 by EricM9104 Quote 2015 Honda Civic LX 4dr | 110k miles | Stock 1996 GMC Yukon SLT 4dr 4wd | 260k miles | JVC Head-unit
C 45. Posted February 25, 2009 Report Posted February 25, 2009 not to sure on those subs but i had the same prob with my dcs and its a problem with the motors i had to give them back to rusty for recones kinda sucked Quote must be nice huh
Mostar Posted February 25, 2009 Author Report Posted February 25, 2009 hooray...errr.... is each sub series wired than paralleled to the amp?? in ran pos to neg on each sub individually Quote '05 GMC Envoy H/U: PIONEER AVH P4300DVD Subs: ( SA-12's Amps: (2) SAZ3500d's MECHMAN 270A Alt and 5 Batteries with lots of 1/0
Mostar Posted February 25, 2009 Author Report Posted February 25, 2009 hooray...errr.... is each sub series wired than paralleled to the amp?? no Quote '05 GMC Envoy H/U: PIONEER AVH P4300DVD Subs: ( SA-12's Amps: (2) SAZ3500d's MECHMAN 270A Alt and 5 Batteries with lots of 1/0
dwright27 Posted February 25, 2009 Report Posted February 25, 2009 how do you wire a dual 1 ohm sub to 1 ohm? Quote 2006 F-150 4 DC XL M2 18's Walled Daily Driver XS Power 4 DC 3.5kw Team DC Team S.P.L. Lot of Audio Technix and 1/0 DC Audio Dealer American Bass Dealer XS Power Dealer Audio Technix Dealer
kentb Posted February 25, 2009 Report Posted February 25, 2009 wire it in series- parallel Quote New System 2 10" Fi SSD, Sundown 1500d Build I build and design enclosures(cheap price), PM ME Kicker L7 Navigator(plexiglass, fiberglass, aeroport) Build BTL 18" Escalade(plexiglass, battery tray) Build http://www.kentbaudio.com Old System
Mostar Posted February 25, 2009 Author Report Posted February 25, 2009 how do you wire a dual 1 ohm sub to 1 ohm? I wired them like this Quote '05 GMC Envoy H/U: PIONEER AVH P4300DVD Subs: ( SA-12's Amps: (2) SAZ3500d's MECHMAN 270A Alt and 5 Batteries with lots of 1/0
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.