white4d96 Posted March 22, 2009 Report Share Posted March 22, 2009 My 96 'Prix 4-door has a transverse leaf in the back. Can I lower this? I was planning on cutting the front springs (which are shot anyway) if I could find a way to lower the rear since NO ONE makes suspension parts for my car... Quote Too many projects, too little time... Link to comment Share on other sites More sharing options...
bumonskateboard6 Posted March 23, 2009 Report Share Posted March 23, 2009 You could always cut the shackles in the rear...weld it up good though when you slice your bit out. Quote Current Systems: 2011 BMW 335i Hertz HDP1 DC LVL3 12" Full Carbon Fiber 2002 Acura TlKenwood DNX9980HD2 DCLVL4 12" Subs with LVL5 Parts D.7 CoilsDC 3.5kHertz HSK-165 up front HCX-165 RearHertz HDP4 AmpDC Power Engineering 260 Amp AltBig 3 and amp powered with KNU 1/0XS Power D2400 Up Front i pulled out my dick in class many of times and had it shown. get over it bitch...stupid open legged hairy beavered bitch... going over rms = smaller box, under rms = bigger box... Low voltage doesn't blow amps. That's a myth. A router that does the sub holes makes rounded edges also? Link to comment Share on other sites More sharing options...
BURRITO Posted March 24, 2009 Report Share Posted March 24, 2009 My 96 'Prix 4-door has a transverse leaf in the back. Can I lower this? I was planning on cutting the front springs (which are shot anyway) if I could find a way to lower the rear since NO ONE makes suspension parts for my car... sorry for not knowing, but whats a "Prix"? Quote Barretto MotorsportsTeam RFCTeam CHMTeam SMD "Blow Sand"Live Your Life Without Boundaries... http://www.jeffbarretto.acnrep.com/d_oppor...A=US_EN&BW= Link to comment Share on other sites More sharing options...
bumonskateboard6 Posted March 24, 2009 Report Share Posted March 24, 2009 I think he means a Pontiac Grand Prix... Quote Current Systems: 2011 BMW 335i Hertz HDP1 DC LVL3 12" Full Carbon Fiber 2002 Acura TlKenwood DNX9980HD2 DCLVL4 12" Subs with LVL5 Parts D.7 CoilsDC 3.5kHertz HSK-165 up front HCX-165 RearHertz HDP4 AmpDC Power Engineering 260 Amp AltBig 3 and amp powered with KNU 1/0XS Power D2400 Up Front i pulled out my dick in class many of times and had it shown. get over it bitch...stupid open legged hairy beavered bitch... going over rms = smaller box, under rms = bigger box... Low voltage doesn't blow amps. That's a myth. A router that does the sub holes makes rounded edges also? Link to comment Share on other sites More sharing options...
BURRITO Posted March 24, 2009 Report Share Posted March 24, 2009 (edited) ^^^ cool! just making sure... http://www.gcustoms.com/product_list/categ...mp;_Hanger_Kits this kit will slam that thing! http://www.gcustoms.com/product_list/categ...s_&_C-Notch Edited March 24, 2009 by BURRITO Quote Barretto MotorsportsTeam RFCTeam CHMTeam SMD "Blow Sand"Live Your Life Without Boundaries... http://www.jeffbarretto.acnrep.com/d_oppor...A=US_EN&BW= Link to comment Share on other sites More sharing options...
white4d96 Posted March 25, 2009 Author Report Share Posted March 25, 2009 yeah, Grand Prix... ...those kids are for solid axles...mine is a multi-link with a transverse leaf spring... completely random, but anyone know if I could make an aftermarket Corvette leaf work? Quote Too many projects, too little time... Link to comment Share on other sites More sharing options...
cracker Posted March 25, 2009 Report Share Posted March 25, 2009 yeah, Grand Prix......those kids are for solid axles...mine is a multi-link with a transverse leaf spring... completely random, but anyone know if I could make an aftermarket Corvette leaf work? man id say that sounds like a project there. i know on some gm cars they made the leafs outta fiberglass or close to it and have seen them broke many times so not sure if removing a single leaf would be a safe option. a vette one im not too sure would be too safe either bein a vette is alot lighter in the rear than your gp, but maybe a lil research online would help... i know of a spring place around this way(northern MN) that does all kinds of springs and they might be able to help or point ya in the right direction... heres the number- 1-800-826-3318 or www.huskyspring.com. the owner used to own a auto shop i worked in until he sold it but they do alot of dif thiungs and if it can be done they would more than likely know something. hope ya find out something and if needed feel free to PM me Quote March 2010 SOTM winner my old buildhttp://www.stevemeadedesigns.com/board/topic/50219-dank-aka-crackers-bonne-new-v2-build-in-the-works-hahahaaaaaa/page__hl__crackers my youtube page - http://www.youtube.com/profile?user=jackiedan04#g/u my feedback - http://www.stevemeadedesigns.com/board/topic/56540-official-cracker-feedback/ i need tacos and bass to live!!!!! and will NEVER change hahaaaa TEAM NOIZE VIOLATION Link to comment Share on other sites More sharing options...
cracker Posted March 25, 2009 Report Share Posted March 25, 2009 man id say that sounds like a project there. i know on some gm cars they made the leafs outta fiberglass or close to it and have seen them broke many times so not sure if removing a single leaf would be a safe option. a vette one im not too sure would be too safe either bein a vette is alot lighter in the rear than your gp, but maybe a lil research online would help... i know of a spring place around this way(northern MN) that does all kinds of springs and they might be able to help or point ya in the right direction... heres the number- 1-800-826-3318 or www.huskyspring.com. the owner used to own a auto shop i worked in until he sold it but they do alot of dif thiungs and if it can be done they would more than likely know something. hope ya find out something and if needed feel free to PM me ...ask for Lee, John or mike if ya call. im not sure of any new people workin there these days. Quote March 2010 SOTM winner my old buildhttp://www.stevemeadedesigns.com/board/topic/50219-dank-aka-crackers-bonne-new-v2-build-in-the-works-hahahaaaaaa/page__hl__crackers my youtube page - http://www.youtube.com/profile?user=jackiedan04#g/u my feedback - http://www.stevemeadedesigns.com/board/topic/56540-official-cracker-feedback/ i need tacos and bass to live!!!!! and will NEVER change hahaaaa TEAM NOIZE VIOLATION Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.