Jump to content
Sundown Audio

Audiopipe Amp Issues Fixed :)


Recommended Posts

Well I have 2 audioPipe AP15001D linked together. Wasnt hooked up long and was working perfect then bam. The slave amp kept going into protect. I unhooked both amps then wired the amp I had as master by itself and it worked fine. Then hooked the amp that I had as the slave up and it stayed on for a split second then into protect. I then hooked the other amp back up and it worked fine then it goes into protect. The amps were bought at the same certified dealer but at diffrent times. The amp that wasnt working first is diffrent then the other amp. The controls knobs on the amp I got first are a shiny polished plastic and the on the other amp its a dull metal. Im going to assuem they werent made at the same time. What are the chances the boards might be diffrent and that caused my problem? I have decent electrical and never had bad voltage loss and my mids and highs amp is still working fine and never had issues while i was bumpin both. Any thing will help. Thanks

Edited by LoudBlazer

1997 2 Door Blazer

Bagged & Body Dropped

SBC/TH350

Link to comment
Share on other sites

probly thinken that 1 ohm load was not a good idea :)

but no reallly good question

03 Trailblazer EXT LT

In Dash

Rear Flip Down

Polk Audio Font & Rear Stage

Hifonics Zeus 4 Chan Amp

Hifonics Brutus Mono Amp

12" Rockford Fosgate Power HX2

T-Line tuned to 45hz

18"BTL T-line @31Hz (9 weeks pregnant)

Link to comment
Share on other sites

They were wired at 2ohms ;)

maybe you just had a bad amp,

but try to spell out how yo had them all hooked up.

03 Trailblazer EXT LT

In Dash

Rear Flip Down

Polk Audio Font & Rear Stage

Hifonics Zeus 4 Chan Amp

Hifonics Brutus Mono Amp

12" Rockford Fosgate Power HX2

T-Line tuned to 45hz

18"BTL T-line @31Hz (9 weeks pregnant)

Link to comment
Share on other sites

Well I know for a fact I had them wired correctly. Me and a few other knowledgeable members discussed it it. Thats why im thinking its an amp issue. Negative on the amps together. The the positive of the sub to the master amp. The negative to the slave amp. Then briged out of the master to the in of the slave rca input.

1997 2 Door Blazer

Bagged & Body Dropped

SBC/TH350

Link to comment
Share on other sites

I followed the manuals instructions aswell. Thats why you and a few others got the text on the wiring. We had to make sure it was correct lol

1997 2 Door Blazer

Bagged & Body Dropped

SBC/TH350

Link to comment
Share on other sites

Problem solved. Great service by AudioPipe. I have two new amps on the way and this time they should be perfect and be exactly the same. Thanks AUDIOPIPE

1997 2 Door Blazer

Bagged & Body Dropped

SBC/TH350

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Who's Online   0 Members, 0 Anonymous, 796 Guests (See full list)

    • There are no registered users currently online
×
×
  • Create New...