Jump to content

Earths New Alt Installed [pics]


Recommended Posts

:NOTE: click each pic up to 2 times for bigger images

as you can see, the old 75amp stock unit [dirty one] and the new Mechman Rhino 250amp large case.

its kind of hard to tell by the pics, but the size difference is pretty substantial

XBkC8hH73T8sz1t3dC_UnsqOY9ONkPmU.jpg

a bare hole where the alt needs to be

ygYUQndW7z9tXwsVSSW1826cnTZEbyBH.jpg

test fit

8E0PhsLusj-5TLa8ed0GKs28jSzHxcsL.jpg

nice new shiny big case unit with small pulley

8OGFj7d22T9ZizysPVkX-K9zc2CgXeik.jpg

starting to put all the accessories back on i had to take off to provide work room

AOXdMhospz-AfndJuVSWCnv_ntIMhe7E.jpg

pic for refference. dont let the dirty old unit fool you to think its bigger, its really quite small in comparison

9DCK8u0a1D8uYJP8f-vC6Qs9EPgePIQD.jpg

another angle for the hell of it

bmmqr5uH1T9q852bY3hSLNmFgLSvCcU2.jpg

had to move that bracket forward for clearance

IGaonzmhvD9qX7WQGcZCl1w9EeHYmkma.jpg

overview shot, you can see part of my big 3 etc

mB5w8oQO2z_RyQUgGC0-mcA58pyQ09ud.jpg

my float voltage

mnzaDoBV7T8akqxqdX_gabQvsA2mZpNW.jpg

engine on [no accessories on] also note this was when the ambient temp was 103`F

w0p40K-R7j_EDnLgctyM1xOn5UBIG-Zd.jpg

this is engine on [lights and A/C on]

sD15st3b3z9OMH0zGTTCgS43EH9odD8z.jpg

and topped it off with a gatorback belt

h53bUitY6j9CZo67sE2lLYadvOO9GwzT.jpg

so its on and running good,took it for a test drive to see if any problems were going to be present or not. so far so good, its smooth and quiet running, so that a big thumbs up!

im going to give it some time so i can see if anything pops up and to verify its performance . once i think ive ran it through its paces, ill post up more of my thoughts with this unit.

as for now, im very happy and pleased with it and Mechman was a pleasure to do business with! i still have batteries to add in the future to this system, so until then....

hope yall enjoy......thanks for looking!

ascendant.jpglogo.jpgteamsundown-1.jpgDCPowerLogoTransparent2.png

Link to comment
Share on other sites

Yeah Mechman is the shit I just installed my 250 rhino this week as well. It went on smooth just needed to get a belt 1 inch bigger to fit. the only problem I had was a lil squeeking at first but I put in the spacer that he provided with alt and no squeeks since. your going to love it is't only been a few days for me and im in love already

Under construction

soon to be:

2 DD Z9518's

8 lunar L1500's (500rms each)

Secondskin Dampner pro

250a Mechman rhino alt

4 runs of 2/0 (installed)

4 batteries (installed)

6-5 1/4's, 2-6 1/2's, 2-4in all ma audio (installed)

bang080.jpg

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Who's Online   0 Members, 0 Anonymous, 738 Guests (See full list)

    • There are no registered users currently online
×
×
  • Create New...