BanginOnABudget Posted May 18, 2009 Report Share Posted May 18, 2009 what kind of a router bit would i use to cut holes? Quote im taking out my passenger seat, battery is disconnected, going to unwire and take out the three amps, take out the 70+ lb box, then the platform so i can crimp 1 wire. Almost as bad as those fegs that put those horns in their grills and roll down the street distorting the block.... 1990 Jeep Cherokee 2 Dr. Big-3 in 0g on Stock Alt. Pioneer 6.5" and 5.25"s temp. until i can afford the new crescendos. Pioneer 6000ub Reciever NO amps at the moment. SA-15 on 1kw coming soon. MSG Me for a free enclosure design!! Flared port kits coming soon!! Link to comment Share on other sites More sharing options...
banginAltima Posted May 18, 2009 Report Share Posted May 18, 2009 what kind of a router bit would i use to cut holes? quarter inch bit Quote If you build it, db's will come... NSPL World Record Holder Trunk 0-1800 watts---147.9 with 1722 clamped watts @ 40Hz(9-20-09). Competition Only Record Holder Trunk 0-500 watts---148.1 2006 Nissan Altima 3.5 SE Currently Rebuilding.... My 150db Plus Trunk Build I do box designs. [benH] 6:24 pm: clipping doesn't really hurt subs [benH] 6:24 pm: being an idiot is what blows subs Link to comment Share on other sites More sharing options...
BanginOnABudget Posted May 18, 2009 Author Report Share Posted May 18, 2009 quarter inch bit i mean is there some sertain kind? nothing i saw said "cutting" or anything... i ended up getting some kind of a 1/4 bit that LOOKED like a cutting bit... Quote im taking out my passenger seat, battery is disconnected, going to unwire and take out the three amps, take out the 70+ lb box, then the platform so i can crimp 1 wire. Almost as bad as those fegs that put those horns in their grills and roll down the street distorting the block.... 1990 Jeep Cherokee 2 Dr. Big-3 in 0g on Stock Alt. Pioneer 6.5" and 5.25"s temp. until i can afford the new crescendos. Pioneer 6000ub Reciever NO amps at the moment. SA-15 on 1kw coming soon. MSG Me for a free enclosure design!! Flared port kits coming soon!! Link to comment Share on other sites More sharing options...
banginAltima Posted May 18, 2009 Report Share Posted May 18, 2009 either a up-spiral or a down-spiral Quote If you build it, db's will come... NSPL World Record Holder Trunk 0-1800 watts---147.9 with 1722 clamped watts @ 40Hz(9-20-09). Competition Only Record Holder Trunk 0-500 watts---148.1 2006 Nissan Altima 3.5 SE Currently Rebuilding.... My 150db Plus Trunk Build I do box designs. [benH] 6:24 pm: clipping doesn't really hurt subs [benH] 6:24 pm: being an idiot is what blows subs Link to comment Share on other sites More sharing options...
Stephen Posted May 18, 2009 Report Share Posted May 18, 2009 1/4" sprial upcut Quote you can cook bacon shirtless if you're not a pussy...lol not hatin, but am i wrong here it looks as if the amp is not grounded its hooked directly to the battery. it that the way it should be. DC POWER Link to comment Share on other sites More sharing options...
BanginOnABudget Posted May 18, 2009 Author Report Share Posted May 18, 2009 so like a drill bit?? Quote im taking out my passenger seat, battery is disconnected, going to unwire and take out the three amps, take out the 70+ lb box, then the platform so i can crimp 1 wire. Almost as bad as those fegs that put those horns in their grills and roll down the street distorting the block.... 1990 Jeep Cherokee 2 Dr. Big-3 in 0g on Stock Alt. Pioneer 6.5" and 5.25"s temp. until i can afford the new crescendos. Pioneer 6000ub Reciever NO amps at the moment. SA-15 on 1kw coming soon. MSG Me for a free enclosure design!! Flared port kits coming soon!! Link to comment Share on other sites More sharing options...
jmitch Posted May 18, 2009 Report Share Posted May 18, 2009 so like a drill bit?? like these Quote I know a lil about everything so dont call me Mr. Know it All. Link to comment Share on other sites More sharing options...
BigJohnny Posted May 18, 2009 Report Share Posted May 18, 2009 Go grab yourself a Rotozip general purpose bit. you can get them at home depot or similar.... looks like a drill bit, but its not as short as the ones pointed out above. Either this Tracing XBIT™ XB-MPGP2 OR Sabrecut™ Bit SC5 good bits, however, go slow, make sure there is 1/4" of shaft between the spiral, and the collet for cooling or the bit will heat up and break. Also, don't force it let the bit do the cutting and I forget which way you need to move the tool, but if you go one way it will be hard to get it to cut, going the other way will make it easy but you need counter the pull of the bit or it will pull you way off course..... I think you want to cut from right to left, or counter clockwise..... I can't quite remember, it's been a while since I cut holes with my Spinsaw. Quote Link to comment Share on other sites More sharing options...
BanginOnABudget Posted May 19, 2009 Author Report Share Posted May 19, 2009 Go grab yourself a Rotozip general purpose bit. you can get them at home depot or similar.... looks like a drill bit, but its not as short as the ones pointed out above.Either this Tracing XBIT™ XB-MPGP2 OR Sabrecut™ Bit SC5 good bits, however, go slow, make sure there is 1/4" of shaft between the spiral, and the collet for cooling or the bit will heat up and break. Also, don't force it let the bit do the cutting and I forget which way you need to move the tool, but if you go one way it will be hard to get it to cut, going the other way will make it easy but you need counter the pull of the bit or it will pull you way off course..... I think you want to cut from right to left, or counter clockwise..... I can't quite remember, it's been a while since I cut holes with my Spinsaw. you go the same way as the bit if its upwards and opisite if its downward i believe. i have a lowes, a sears, and an ace. should i check them all or one specific? i didnt see any at lowes but i wasnt looking for this kind of bit. Quote im taking out my passenger seat, battery is disconnected, going to unwire and take out the three amps, take out the 70+ lb box, then the platform so i can crimp 1 wire. Almost as bad as those fegs that put those horns in their grills and roll down the street distorting the block.... 1990 Jeep Cherokee 2 Dr. Big-3 in 0g on Stock Alt. Pioneer 6.5" and 5.25"s temp. until i can afford the new crescendos. Pioneer 6000ub Reciever NO amps at the moment. SA-15 on 1kw coming soon. MSG Me for a free enclosure design!! Flared port kits coming soon!! Link to comment Share on other sites More sharing options...
BigJohnny Posted May 19, 2009 Report Share Posted May 19, 2009 I would try lowes above the others, but they should ALL carry the bits....they're usually near the dremels, somewhere in that general area. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.