Jump to content
Sundown Audio

Recommended Posts

Posted

I have a hk4000D pushing on of my 18" BTL and iv got it wired to 1 ohm the amp does fine at lower volume but when i turn it up the amp shuts off does it do this because it isnt getting enough volts or wat???

~REFS~

-CA.com-Gianotti(2 18" FI BTL D1) Slowd N Throwd(Wiring),Ebrunn(PC monitor),Rab(HK4000D)

-SMD.com-Nismofreak(Radar),BigP(Phone Headset),anonymous(Xbox360 Headset)

Posted

If it is the MA Audio HK4000D, I had (6) of these amps at one point and had to bypass the protection circuit or it would cut off under stress rather easily.

What is your voltage at the time it cuts off ?

Posted

I've heard they're very voltage hungry. Maybe all the bypassed protection circuits are why you see so many of these amps blown up :P

goodgrammarbc7.gif

10.x volts fo' life!

Posted

those amps the protection cuts it off at 1 ohm because they only rate it at 2 ohm stable you have to bypass the protection to keep it from cutting off at 1 ohm any lower on a weak electrical and get ready to toast some marshmellows.

TEAM GROUNDPOUNDERS INC.

156.5 OUT THE TRUNK OF A 95 CADDY

W/1 SUB & 2AMPs

score done on a termlab mic in the kick

on the dash sealed was 154

groundpounders-sig-1.jpg

Posted

whats your electrical system looking like...sounds like a voltage issue

i had an amp do that to me before...such a stupid mistake...the last battery in the "chain" came disconnected from the rest and wasnt getting charged...it dropped down to 9 volts and the amp went into protect. make sure all your connections are tight and your electrical system is strong

NoFearX18 said:

Nick will bang just about anything.....LMAO....pun intended

On 4/13/2010 at 9:51 AM, meade916 said:

i was like DAMN, Chode is hardcore! he makes james look like a friendly person LOL!

trainman0978 said:

I dont know who is worse with the buttholes Chode or Big P...

 

thdsig2_zps7dd050e2.jpg

 

TDHsig1_zps90d6048b.jpg

Team Deadly Hertz / Team DC Audio / Team XS Power

2010 DC AUDIO MEMBER OF THE YEAR!!!

DuckretaryFEAR THE DUCK Durangho Chodes Blowthrough Build Youtube vids Muh Wife

 

Need DC Audio? Hit me up for pricing!!!

Posted

be very carful runing that amp at 1 ohm. we had one catch fire at 1 ohm.

Dodge Magnum with custom 300c front end, laid out on air bags

*4) 12" Cadence Daytona walled

*1) AudioQue 20k

*270a DC Power Alt (Dual coming soon)

Posted

These are not rated to perform @ 1ohm, you need to have it modded to work below 2ohms, and you need a strong, strong electrical system for it to perform well, even with a strong electrical not a guarantee that it won't go up in smoke. I would burb @ 1ohm but I wouldn't run it daily at 1ohm, even if it was modded. It's sort of a high risk, low reward running it @ 1ohm, what you gain in watts is not worth what you give up in reliability.

supercharged hummer h2

8 Sundown nightshade v'2 Scott Bowman built 4th order bandpass

2 precision power pcx 4125(mids & hi's)

2 Stetsom 14k2e's

alpine ina-w910

dual Mike Singer350 amp alt

8 kinetic 2400 batteries two shuriken bt 120

1 kinetic 2000 under the hood

link to build log:

My link

Posted

if I am wrong btl sit a good bit lower then 1 cold. like .65

Dodge Magnum with custom 300c front end, laid out on air bags

*4) 12" Cadence Daytona walled

*1) AudioQue 20k

*270a DC Power Alt (Dual coming soon)

Posted (edited)

my electrical is all stock n my alt is only 117amps...only thing i got goin for it is 0gauge....I was thinking of wiring my sub to a higher ohm load..i would b able to wire it to 4ohms wouldnt i???

the amp kicks off when it hits in the 9volt range on the screen

Edited by Tkitt21

~REFS~

-CA.com-Gianotti(2 18" FI BTL D1) Slowd N Throwd(Wiring),Ebrunn(PC monitor),Rab(HK4000D)

-SMD.com-Nismofreak(Radar),BigP(Phone Headset),anonymous(Xbox360 Headset)

Posted

bro you are going to smoke that amp! no doubt in my mind.

Just stop, run the amp at 4 ohms, and upgrade you electrical!

Dodge Magnum with custom 300c front end, laid out on air bags

*4) 12" Cadence Daytona walled

*1) AudioQue 20k

*270a DC Power Alt (Dual coming soon)

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Who's Online   0 Members, 0 Anonymous, 563 Guests (See full list)

    • There are no registered users currently online
×
×
  • Create New...