Got_Bass89 Posted June 10, 2009 Report Share Posted June 10, 2009 (edited) Alright guys been playin with designs to fit 18s in my truck... Im cutting my wheel wells out 3inches so I can slide my box right in... So my max measurements are 33L x 46W x 20H Doing subs up, port up... Figure sub displacement .25 each and Ima just do 1 45 for port and do a cross with 1" dowel for bracing baffle and sides... Also glass them a bit.. Need atleast 12cubes but if I get decent port area and low tuneing I have a little less and then if I keep my port area and just tune higher I got plenty of airspace... Donno what I should do... Also power wise... They 2x lvl4 /w lvl5 coil 18s off a saz1500 each.... Edited June 10, 2009 by Got_Bass89 Quote Passport Build Here Alarm: Prestige APS997A 2-Way/Remote Start HeadUnit: Pioneer DEH-P6000UB Front Battery: Yellowtop Optima D34/78 Back Battery: 2x C&D Technologies High Rate Series UPS12-475FR 134AH Subs: 2x DC Lv4XL 18's Amps: 2x Sundown Saz1500's Strapped Box: 12Cubes 33hz 185sqin Port(15.4sqin per cube) Pillars: AudioBahn AS31Q Front Doors: Clif Designs TX40.5 Back Doors: Clif Designs CD50.4C Rear Speakers: Clif Designs TX46.5 Front/Rear Amp: Kicker ZX350.4 Back/Pillars Amp: Kicker ZX200.2(Looking for another zx350.4) Electrical: 1/0 Scorpion Wire 2 Runs Pos and 2Runs Ground, Knu 1/0 Flex Running to Amps ect, Big 3, JL 8Ga For Speaker Wire, Knu Karma RCA's, Scorpion Volt Meter Deadener: 100 sqft Sound Destroyer Mat And SECOND SKIN Damplifier Pro Door Pack Link to comment Share on other sites More sharing options...
AI James Posted June 11, 2009 Report Share Posted June 11, 2009 whats the tuning your looking for Quote Link to comment Share on other sites More sharing options...
Got_Bass89 Posted June 11, 2009 Author Report Share Posted June 11, 2009 I was going for like 33hz.. I like the lows but if I can tune higher and still get the lows thats fine.. Not like C&S lows but you know what I mean.. Anyone else got thoughts working with that mount of space? Quote Passport Build Here Alarm: Prestige APS997A 2-Way/Remote Start HeadUnit: Pioneer DEH-P6000UB Front Battery: Yellowtop Optima D34/78 Back Battery: 2x C&D Technologies High Rate Series UPS12-475FR 134AH Subs: 2x DC Lv4XL 18's Amps: 2x Sundown Saz1500's Strapped Box: 12Cubes 33hz 185sqin Port(15.4sqin per cube) Pillars: AudioBahn AS31Q Front Doors: Clif Designs TX40.5 Back Doors: Clif Designs CD50.4C Rear Speakers: Clif Designs TX46.5 Front/Rear Amp: Kicker ZX350.4 Back/Pillars Amp: Kicker ZX200.2(Looking for another zx350.4) Electrical: 1/0 Scorpion Wire 2 Runs Pos and 2Runs Ground, Knu 1/0 Flex Running to Amps ect, Big 3, JL 8Ga For Speaker Wire, Knu Karma RCA's, Scorpion Volt Meter Deadener: 100 sqft Sound Destroyer Mat And SECOND SKIN Damplifier Pro Door Pack Link to comment Share on other sites More sharing options...
Noobtastic14 Posted June 11, 2009 Report Share Posted June 11, 2009 I'm no James- but this is 12.2cuft @32hz 5x 31.5" port 13sqin per cuft LMK if you want a cut sheet -Drew Quote I am a United States Military Arts and Crafts Professional. Sand it off, Paint it on. uhoh_45 said: dont be a pussy P give the jeep to drew Link to comment Share on other sites More sharing options...
AI James Posted June 11, 2009 Report Share Posted June 11, 2009 you should be able to get relativle low with them even tuned at 34-35hz Quote Link to comment Share on other sites More sharing options...
Got_Bass89 Posted June 11, 2009 Author Report Share Posted June 11, 2009 Looking to do port off back glass since its at an angle and shoots air forward... Anyone else for any ideas? Anyone have experience tuned a bit higher? Quote Passport Build Here Alarm: Prestige APS997A 2-Way/Remote Start HeadUnit: Pioneer DEH-P6000UB Front Battery: Yellowtop Optima D34/78 Back Battery: 2x C&D Technologies High Rate Series UPS12-475FR 134AH Subs: 2x DC Lv4XL 18's Amps: 2x Sundown Saz1500's Strapped Box: 12Cubes 33hz 185sqin Port(15.4sqin per cube) Pillars: AudioBahn AS31Q Front Doors: Clif Designs TX40.5 Back Doors: Clif Designs CD50.4C Rear Speakers: Clif Designs TX46.5 Front/Rear Amp: Kicker ZX350.4 Back/Pillars Amp: Kicker ZX200.2(Looking for another zx350.4) Electrical: 1/0 Scorpion Wire 2 Runs Pos and 2Runs Ground, Knu 1/0 Flex Running to Amps ect, Big 3, JL 8Ga For Speaker Wire, Knu Karma RCA's, Scorpion Volt Meter Deadener: 100 sqft Sound Destroyer Mat And SECOND SKIN Damplifier Pro Door Pack Link to comment Share on other sites More sharing options...
Noobtastic14 Posted June 12, 2009 Report Share Posted June 12, 2009 (edited) 12.2 @36hz 180sqin of port off the back -Drew **14.75 sqin of port per cuft and i pushed the height up .75 Edited June 12, 2009 by Noobtastic14 Quote I am a United States Military Arts and Crafts Professional. Sand it off, Paint it on. uhoh_45 said: dont be a pussy P give the jeep to drew Link to comment Share on other sites More sharing options...
thehoe92 Posted June 12, 2009 Report Share Posted June 12, 2009 wouldn't the subs be too close to the port on that one drew? Quote Wouldnt be thehoe92 without teh purple Link to comment Share on other sites More sharing options...
87accord Posted June 12, 2009 Report Share Posted June 12, 2009 dam drew i might ask you to help me on my wall lay out good job man Quote new system in the works (3) DC lvl 4xls 15's (one of three are here) (2) DD z1 (done) old kenwood four ch 4 runs of 2/0 (done) ? 200 amp alt may two ?? Link to comment Share on other sites More sharing options...
Noobtastic14 Posted June 12, 2009 Report Share Posted June 12, 2009 No- with a double baffle it should be fine. if he is worried about panel strength during the build a touch of glass will ease any worries -Drew Quote I am a United States Military Arts and Crafts Professional. Sand it off, Paint it on. uhoh_45 said: dont be a pussy P give the jeep to drew Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.