Rose-Villian Posted June 14, 2009 Report Share Posted June 14, 2009 SO whats The Cost of the Saw..? Quote WWW.OSGINDUSTRIES.COM I LOVE HATER'S Link to comment Share on other sites More sharing options...
SojiaRaggs9000 Posted June 14, 2009 Report Share Posted June 14, 2009 (edited) damn, sorry to hear that. How is the hand now?As for the saw.....damn that's cool. definitely worth the repair cost of the table. Repairing your fingers isn't always a sure thing, but the table saw is. Even if the table saw gets completely trashed the cost of a new one would still be cheaper than all the medical bills. Lost from the first joint right under the nail and up on my pointer finger. Middle finger has an artificial joint in it that needs to be replaced every 10~15 years (Free for life unless I injure it again). Either way it very good all things considering , its won't never be normal but it works for me. Hand isnt as useful as before but it gets the job done. Just glade it wasn't worse considering Im right handed lol. Really only downside is I'm labeled 10% disabled @ 22yrs old. Kinda hurts job opportunities. Abit more on topic... I have a friend that is a handyman (works in construction) and he chopped off his pinky, ring and middlie fingers all the way down to the knuckles on his left hand. Its crazy. Edited June 14, 2009 by SojiaRaggs9000 Quote * Eclipse CD3200 with PAC SWI-CAN2 and SW-ECL2 Steering Wheel Controls Interface* Pioneer D-Series Mids and Highs ( Fronts: TS-D1702C; Rears; TS-D1702R and Dash; TS-D1002R )* Rockford Fosgate PBR300X4 ( Mids and Highs Amp )* DC 3.5k with Dual Inputs; Custom Plexiglass Backing ( Sub Amp )* Rockford Fosgate Balanced Line Driver * One FULLY LOADED ~ 10" DC m2 XL* Custom Built Carpeted Ported Box Tuned to 32hz. Single Chamber With Volume of 1.44618³ ft ; 1.13216³ ft After Displacement* Custom Built Carpeted Trunk Wall with Added Fans for Amplifier Cooling* MechMan 240a High Output Alternator * KnuKonceptz Krystal Kable RCA Cables* Upgraded Electrical With 1/0 KnuKonceptz Kolossus Fleks Kable and 1/0 Sky High Car Audio Cable* Five Exide Orbital ORB34M Marine 12 Volt Batteries* PowerMaster XS D3100 12 Volt Battery My 2008 Chrysler 300 Limited - SuperCharged 3.5L V6 - UBL My Old 2005 Ford Taurus - CarDomain - Vehicle Was Sold Link to comment Share on other sites More sharing options...
raytard Posted June 14, 2009 Report Share Posted June 14, 2009 wow, it takes some balls to stick your finger in a spinning table saw im sold and 60 bux is sooooo worth it....shit, the paint to cover the bloodsplatter on the wall would cost more Quote Build: http://www.stevemeadedesigns.com/board/ind...hl=avalon+build monster/rockford/kicker/stinger cables, pioneer source, jbl highs/amps, kinetik/shuriken batts, iraggi alt, dei security, dc subs(atleast for now) Team DC Link to comment Share on other sites More sharing options...
SojiaRaggs9000 Posted June 14, 2009 Report Share Posted June 14, 2009 (edited) SO whats The Cost of the Saw..? lol I went to there site and this is what it says. Sounds like an oxymoron to me. SawStop performance that won’t cost you an arm and a leg – or a finger. Performance and Safety for $2,899 * Patented safety system stops the blade on contact with skin * Superior dust collection captures 95% of dust * Quick-release insert requires no tools Lol now do take into consideration that that price is for a Professional Grade Cabinet Saw Edited June 14, 2009 by SojiaRaggs9000 Quote * Eclipse CD3200 with PAC SWI-CAN2 and SW-ECL2 Steering Wheel Controls Interface* Pioneer D-Series Mids and Highs ( Fronts: TS-D1702C; Rears; TS-D1702R and Dash; TS-D1002R )* Rockford Fosgate PBR300X4 ( Mids and Highs Amp )* DC 3.5k with Dual Inputs; Custom Plexiglass Backing ( Sub Amp )* Rockford Fosgate Balanced Line Driver * One FULLY LOADED ~ 10" DC m2 XL* Custom Built Carpeted Ported Box Tuned to 32hz. Single Chamber With Volume of 1.44618³ ft ; 1.13216³ ft After Displacement* Custom Built Carpeted Trunk Wall with Added Fans for Amplifier Cooling* MechMan 240a High Output Alternator * KnuKonceptz Krystal Kable RCA Cables* Upgraded Electrical With 1/0 KnuKonceptz Kolossus Fleks Kable and 1/0 Sky High Car Audio Cable* Five Exide Orbital ORB34M Marine 12 Volt Batteries* PowerMaster XS D3100 12 Volt Battery My 2008 Chrysler 300 Limited - SuperCharged 3.5L V6 - UBL My Old 2005 Ford Taurus - CarDomain - Vehicle Was Sold Link to comment Share on other sites More sharing options...
AI James Posted June 15, 2009 Report Share Posted June 15, 2009 i rmeember when this thing was like 10k and i thought it was a deal then Quote Link to comment Share on other sites More sharing options...
SQMonte Posted June 15, 2009 Report Share Posted June 15, 2009 Wonderful invention. Keeping a finger is well worth the $60 to fix it should you ever need to Quote Alpine CDA-117...Memphis 16-X03 CDT Audio SQA-4100...SEAS Prestige H1396...Crescendo MP-6 Soundstream Rubicon 1.2500d...Digital Designs 3512f Link to comment Share on other sites More sharing options...
tacomabanga1986 Posted June 15, 2009 Author Report Share Posted June 15, 2009 lol, we got about 4 table saws here but none costed $3,000 but then again if u do alot of cabnet work n what knot it would be worth it, i wasnt sayin the $60 was expensive but the $3k but u can never put a price on safety, ied get one if i did that much work but due to the fact that we already have about 4 or so table saws here that work fine i dnt need another, lol, not tryin to brag or anything but some ppl like to get inpatient when workin, like this dumb shit Quote here's a link to my system 99 toyota tacoma , 2 mtx 8000 1504's in a sealed downfire , 1000w memphis amp here's a link to my other system my 90 geo prizm test car heres a thread i got of new songs u can dl that are legal = Some Good Bangage/you Can Dl These Free And Legit Link to comment Share on other sites More sharing options...
may03LT Posted June 15, 2009 Report Share Posted June 15, 2009 man that saw is the shit....awesome Quote Link to comment Share on other sites More sharing options...
SojiaRaggs9000 Posted June 15, 2009 Report Share Posted June 15, 2009 (edited) lol, we got about 4 table saws here but none costed $3,000 but then again if u do alot of cabnet work n what knot it would be worth it, i wasnt sayin the $60 was expensive but the $3k but u can never put a price on safety, ied get one if i did that much work but due to the fact that we already have about 4 or so table saws here that work fine i dnt need another, lol, not tryin to brag or anything but some ppl like to get inpatient when workin, like this dumb shit lol u made my have flash backs of pain. That guys was freaking out tho. Edited June 15, 2009 by SojiaRaggs9000 Quote * Eclipse CD3200 with PAC SWI-CAN2 and SW-ECL2 Steering Wheel Controls Interface* Pioneer D-Series Mids and Highs ( Fronts: TS-D1702C; Rears; TS-D1702R and Dash; TS-D1002R )* Rockford Fosgate PBR300X4 ( Mids and Highs Amp )* DC 3.5k with Dual Inputs; Custom Plexiglass Backing ( Sub Amp )* Rockford Fosgate Balanced Line Driver * One FULLY LOADED ~ 10" DC m2 XL* Custom Built Carpeted Ported Box Tuned to 32hz. Single Chamber With Volume of 1.44618³ ft ; 1.13216³ ft After Displacement* Custom Built Carpeted Trunk Wall with Added Fans for Amplifier Cooling* MechMan 240a High Output Alternator * KnuKonceptz Krystal Kable RCA Cables* Upgraded Electrical With 1/0 KnuKonceptz Kolossus Fleks Kable and 1/0 Sky High Car Audio Cable* Five Exide Orbital ORB34M Marine 12 Volt Batteries* PowerMaster XS D3100 12 Volt Battery My 2008 Chrysler 300 Limited - SuperCharged 3.5L V6 - UBL My Old 2005 Ford Taurus - CarDomain - Vehicle Was Sold Link to comment Share on other sites More sharing options...
uluahunta808 Posted August 26, 2009 Report Share Posted August 26, 2009 my IET teacher was talking bout this to us. said when he sed to work on cabinits they used this Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.