eckorog2005 Posted July 23, 2009 Report Posted July 23, 2009 i saw that my jl 1000/1v2 has 2 sets of output to allow for 2 subs to be connected. would it be better to do this or get an amp for each sub?
97maxima Posted July 23, 2009 Report Posted July 23, 2009 it depends, what subs. seriously American Bass*DC Power
Kandrew279 Posted July 23, 2009 Report Posted July 23, 2009 that amp can fully power two of those subs edit... i meant can't. jl recomends 1000rms for each sub. that amp would put out 500rms to each sub.
eckorog2005 Posted July 23, 2009 Author Report Posted July 23, 2009 ok thanks, but y do people always do an amp for each sub then?
Basshead08 Posted July 23, 2009 Report Posted July 23, 2009 Bc sometimes one amps rms isn't enough for the two subs in the application therefore needing more amps. System tear out has begun...Out with the old i have a iq of 128 i graduated at the top of my class tell me how im reatrded you are the 1 thats dumb as hell you can't even spell Look at the underlined text hahahahahahahaha I think of it as the virgin losing the virginity technique not just jumping in to it, and pounding away, but going at it slowly over time, to get to that full extreme
eckorog2005 Posted July 23, 2009 Author Report Posted July 23, 2009 understandable, but its 2 jl 13w7 with 2 1000/1v2 that i always see being used which is pointless if one amp can do that. should have made that clear in the beginning, sorry about that.
97maxima Posted July 23, 2009 Report Posted July 23, 2009 if it is a 1000rms sub and you have 2 you need 2000 watts to push them all the way American Bass*DC Power
Eric B Posted July 23, 2009 Report Posted July 23, 2009 helps with impedance rise a lil bit 2007 Chevy HHR LT UNDER CONSTRUCTION 1st Place Loud N Low 2010 MWSPL Finals 3rd Place Xtreme 3 2010 MWSPL Finals
Recommended Posts
Archived
This topic is now archived and is closed to further replies.