Jump to content
Sonic Electronix

how can i design a box for a single cab?


Recommended Posts

ok so i scooted the seat up all the way. its 57'' inchs wide. 21'' from the floor to the top of the seat. 10'' from the back of the seat to the back of the cab(lower part). 4'' from the back of the seat to the back of the cab(higher part).

how many cubes can i get per speaker???

Check out my build log for a single cab gmc. I did 3cuft and made box pretty big but you don't have to go that big if you don't want to. I have limited leg room lmao..... Just for ideas

2 AQ 10'' HDC3 copper subs

1 3500d AQ amp

146.3db on TL with stock electrical in single cab truck at 32hz

RESULT: 1st place at comp, 3rd overall out of 20 cars

Link to comment
Share on other sites

Check out my build as well. I stuffed 4 real 12's (not shallow mounts) in my standard cab S-10 in a 3.9 cube box. It was pretty easy but I had to go with 1/2" mdf which is my only regret.

Current System:

Pioneer 6900 HU

Front Stage: (for now)

Soundstream tarantula 5.25 in the doors

Soundstream tarantula 4x6 in the dash

Kenwood 400.4 for mids & highs

Bass:

4 Soundstream RW-12's

2 Power Acoustik Stax 4000/1D's

single chamber box, 2.65 cubes.

Currently under the knife being bagged

Rebuilding err'thang

Link to comment
Share on other sites

sick trucks guys. will i have to get a bigger amp if i'll be running 1200-1400 rms?

A bigger amp than what? my amps claim 2200 RMS but its realistically about 1500

Current System:

Pioneer 6900 HU

Front Stage: (for now)

Soundstream tarantula 5.25 in the doors

Soundstream tarantula 4x6 in the dash

Kenwood 400.4 for mids & highs

Bass:

4 Soundstream RW-12's

2 Power Acoustik Stax 4000/1D's

single chamber box, 2.65 cubes.

Currently under the knife being bagged

Rebuilding err'thang

Link to comment
Share on other sites

ok. that answers all my questions, but one.............will it be necessary to buy a new alt and run 0ga wire?

oh and it has dual battery setup al ready :yahoo:

necessary no, but it would be smart to AT LEAST upgrade the wire

Link to comment
Share on other sites

yeah, only need a new alt when ur pushing over 1,500rms solid. i can do 1,500rms with my stock electrical. hell i got a 146 on the Tl with stock electrical. good luck with ur build and keep us posted

2 AQ 10'' HDC3 copper subs

1 3500d AQ amp

146.3db on TL with stock electrical in single cab truck at 32hz

RESULT: 1st place at comp, 3rd overall out of 20 cars

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Who's Online   0 Members, 0 Anonymous, 375 Guests (See full list)

    • There are no registered users currently online
×
×
  • Create New...