Crump Posted July 28, 2009 Report Posted July 28, 2009 Just wondering instead of drilling out my 5/16" rings to 3/8 inch rings is there an adapter for kinetik batts? to go to 5/16" rings? I have looked but i couldnt find one. Thanks a link would help also Team gg Team doa Installs I have doneMy 2010 Rebuild 144 db so far....2 DC xl 10s Firing into cabin on a RF 25002 12" AQ HD's powered by a Saz 2k + Lots o Mids+Highs
bobonit Posted July 28, 2009 Report Posted July 28, 2009 Just wondering instead of drilling out my 5/16" rings to 3/8 inch rings is there an adapter for kinetik batts? to go to 5/16" rings? I have looked but i couldnt find one. Thanks a link would help also I have looked as well and couldn't find anything. I ended up making buss bars anyway so I could handle more connections. 97 Maxima SE Bunch of shit going in, check out the build Build Log
Moti Posted July 28, 2009 Report Posted July 28, 2009 I would just use ring terminals. Just solder them, imo they work the best. Make your own buss barr ;P
Crump Posted July 28, 2009 Author Report Posted July 28, 2009 I have looked as well and couldn't find anything. I ended up making buss bars anyway so I could handle more connections. I would just use ring terminals. Just solder them, imo they work the best. Make your own buss barr ;P I wanna make buss bars but no one around here has more than 1/8" aluminum, i need at least 1/4" Team gg Team doa Installs I have doneMy 2010 Rebuild 144 db so far....2 DC xl 10s Firing into cabin on a RF 25002 12" AQ HD's powered by a Saz 2k + Lots o Mids+Highs
wL<3bass Posted July 28, 2009 Report Posted July 28, 2009 I had to drill a few of my terminals out from 5/16" to 3/8" on like two of them.....b/c I ran out of the large style ones. Vehicle: 1997 S10 Blazer 4dr 4X4 Exterior: Rear End Bagged, Black Grill, Lifted 2" Amplifiers: Rockford Fosgate T8004 & T10001bd Batteries: 2 Stinger SPV35, Kinetik HC2400 Electrical: Big 3, DC Power 290amp Alternator w/ MLA at 15.5v Enclosure: 4.2 ft³ @ 33Hz 84sq.in. of port (20sq.in. per cube) Headunit: Eclipse CD3200 w/ 80G iPod Mids/Highs: Rockford T152s (a-pillars), Rockford T162s (doors) Subwoofers: 1 15" Fi BL Fully Loaded Wire: All 1/0g Kicker Hyperflex My YouTube Videos My Fiberglass A-Pillar Build My "Seamless" Looking Box Build My DD1508 T-Line Bandpass Build "Seamless" w/ Acrylic Windows (for '05 TrailBlazer) My Stealth 8" Fiberglass Build (for '05 TrailBlazer) My Build For A Friend's '08 Cobalt 15" BL Sealed Off From The Trunk My feedback/references...
bobonit Posted July 28, 2009 Report Posted July 28, 2009 I wanna make buss bars but no one around here has more than 1/8" aluminum, i need at least 1/4" I made mine out of copper, got it from www.mcmaster.com Mine are 3/8" x 1.5" 97 Maxima SE Bunch of shit going in, check out the build Build Log
Recommended Posts
Archived
This topic is now archived and is closed to further replies.