WaTTz305 Posted August 4, 2009 Report Share Posted August 4, 2009 Ok well this is actually my first thread and i really need someones help. ok here my dilemma =) an RF T1 10" handles 600rms and so does the 12", and the 15". ok so now my question is can a 15" T1 handle more than what it says? because im thinking of getting 4 15" T1's and powering them up with 4 T1000's. will they handle it? oh and by the way they are going to be in a sealed enclosure. Quote Link to comment Share on other sites More sharing options...
lowblueranger Posted August 4, 2009 Report Share Posted August 4, 2009 I'd probably only run two T10001's to four T1 15's. They can handle more than 600 watts each but if you run each one of your amps at 1ohm they would be running around 1400 watts per sub. I'd run four T2's off four T10001's, that would be a much better match. Quote Alpine INA-W900 Rockford Fosgate Punch 200ix Rockford Fosgate power T1500-1 Sundown SA-10 x2 Focal 6x8's front Rockford Fosgate Power T1682 rear Rockford Fosgate and Stinger Wiring Powermaster D3400, S680 Link to comment Share on other sites More sharing options...
Chode69 Posted August 4, 2009 Report Share Posted August 4, 2009 depends the ohmload of the T1s. if they are dual 2 ohm and you wire it to 1 ohm you will most likely smoke them subs unless you REALLY know what your doing. the 15s are rated at 600 but the most i seen safely run to them was around 800 watts RMS. now there may be people that run higher but tuning of the box, gains, freq they play and what not plays a BIG part. if you have dual 4 ohm i can see you running them at 2 ohm a piece and getting around 700-1000 watts and being relatively safe doing so Quote NoFearX18 said: Nick will bang just about anything.....LMAO....pun intended On 4/13/2010 at 9:51 AM, meade916 said: i was like DAMN, Chode is hardcore! he makes james look like a friendly person LOL! trainman0978 said: I dont know who is worse with the buttholes Chode or Big P... Team Deadly Hertz / Team DC Audio / Team XS Power 2010 DC AUDIO MEMBER OF THE YEAR!!! DuckretaryFEAR THE DUCK Durangho Chodes Blowthrough Build Youtube vids Muh Wife Need DC Audio? Hit me up for pricing!!! Link to comment Share on other sites More sharing options...
WaTTz305 Posted August 4, 2009 Author Report Share Posted August 4, 2009 damn cause a friend of mine ran 4 of them in a little pontiac sunfire with 4 t1000's and he said the coils would get warm every 15 to 20 minutes but he said they can handle it. cause i have 2 t1000's already all i really need to know is if it would handle it. have you guys ever seen somebody run a t1000 to a t1? Quote Link to comment Share on other sites More sharing options...
Chode69 Posted August 4, 2009 Report Share Posted August 4, 2009 find out what ohm load they are...he may have them at either 2 or 4 ohm if he has dual 4 ohm, you can use 2 per amp and she will SLAM. believe me...i know...i used to have that exact set up with 4 T1 dual 4s and 2 T10001bds Quote NoFearX18 said: Nick will bang just about anything.....LMAO....pun intended On 4/13/2010 at 9:51 AM, meade916 said: i was like DAMN, Chode is hardcore! he makes james look like a friendly person LOL! trainman0978 said: I dont know who is worse with the buttholes Chode or Big P... Team Deadly Hertz / Team DC Audio / Team XS Power 2010 DC AUDIO MEMBER OF THE YEAR!!! DuckretaryFEAR THE DUCK Durangho Chodes Blowthrough Build Youtube vids Muh Wife Need DC Audio? Hit me up for pricing!!! Link to comment Share on other sites More sharing options...
WaTTz305 Posted August 4, 2009 Author Report Share Posted August 4, 2009 i mean this is a really good freind of mine he's basically tought me everything i know =) he said all the amps were at 1 ohm and i was like bro are you sure they can handle it and he said in the right sealed box yea... but i mean i trust him but....i really dont want to spend money on new subs every week LOL and yeah ive seen your vids on youtube. what were you metering? Quote Link to comment Share on other sites More sharing options...
Shyne151 Posted August 4, 2009 Report Share Posted August 4, 2009 You can do much better than the t1's... They do not impress me one bit. Power wise... I probably wouldn't throw much more than 750-800rms at them in a ported box. Quote -Installer for Duke's Car Stereo 2000 Pontiac Grand Prix - Ported Eaton M90 S/C, 3.5" pulley, XS Power Headers, 1.9 Rockers, FWI, Poly Motor Mounts, Custom Tune. RF T1000-1bdCP and T400-4 Boston Acoustics SPG 555 Kenwood eXcelon 995 RF Punch 6.5" components and MB Quart Premium 6x9"s Powermaster Alternator, YellowTop D34, Vmax CT1000 Link to comment Share on other sites More sharing options...
Chode69 Posted August 4, 2009 Report Share Posted August 4, 2009 i mean this is a really good freind of mine he's basically tought me everything i know =)he said all the amps were at 1 ohm and i was like bro are you sure they can handle it and he said in the right sealed box yea... but i mean i trust him but....i really dont want to spend money on new subs every week LOL and yeah ive seen your vids on youtube. what were you metering? have him pull a sub and find out the ohm load for sure before we really can give you anymore advise Quote NoFearX18 said: Nick will bang just about anything.....LMAO....pun intended On 4/13/2010 at 9:51 AM, meade916 said: i was like DAMN, Chode is hardcore! he makes james look like a friendly person LOL! trainman0978 said: I dont know who is worse with the buttholes Chode or Big P... Team Deadly Hertz / Team DC Audio / Team XS Power 2010 DC AUDIO MEMBER OF THE YEAR!!! DuckretaryFEAR THE DUCK Durangho Chodes Blowthrough Build Youtube vids Muh Wife Need DC Audio? Hit me up for pricing!!! Link to comment Share on other sites More sharing options...
WaTTz305 Posted August 4, 2009 Author Report Share Posted August 4, 2009 have him pull a sub and find out the ohm load for sure before we really can give you anymore advise ok ill do that. thanks for the help so far Quote Link to comment Share on other sites More sharing options...
WaTTz305 Posted August 4, 2009 Author Report Share Posted August 4, 2009 oh and tuning wise im going to set it up for some nasty ass lows idk if thats worse or better Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.