Torres Posted August 8, 2009 Report Share Posted August 8, 2009 just measure from the furthest point of the seat, most likely the top of it or the headrest if you have one to the back of the truck. Link to comment Share on other sites More sharing options...
98HOEONSIXEZ Posted August 8, 2009 Author Report Share Posted August 8, 2009 Ok in this first picture,i measured about an inch and a half off the back wall to about 2 inches away from the back of the seat and came up with 19-20 inches.Also i dont know if you can see it in the picture there is a ledge that comes out from the back wall that is about 3 iches higher than the rest of the floor,it extends out from the back wall to about ten inches then it drops down and levels out for the rest fo the floor The next one i measured was about 1.5 inches from the back glass to the back of the seat and got right at 10 inches This one is measured from close to the floor up the back of the seat so this would be the front face height This one is from side to side on the bottom. Link to comment Share on other sites More sharing options...
matt402 Posted August 8, 2009 Report Share Posted August 8, 2009 i agree with exposport on a lil more port area. i dont have any programs to help with designs or i would. i think a box like BASS14's would be a good design though. subs firing forward on passenger side, port up on driver side (get ur lean on). ill look for his build link. Link to comment Share on other sites More sharing options...
98HOEONSIXEZ Posted August 8, 2009 Author Report Share Posted August 8, 2009 Heres a few more pictures i took. this is the ledge that i was talking about,its about 3 inches tall This is the height from the top of the ledge up the back window looks to be about 24-25 inches to the back window line,but again it can go higher if needed too This is how long that ledge is looks to be about 7-8 inches Link to comment Share on other sites More sharing options...
smokeumtires Posted August 8, 2009 Report Share Posted August 8, 2009 Drawin up one right now homeslice Link to comment Share on other sites More sharing options...
98HOEONSIXEZ Posted August 8, 2009 Author Report Share Posted August 8, 2009 i agree with exposport on a lil more port area. i dont have any programs to help with designs or i would. i think a box like BASS14's would be a good design though. subs firing forward on passenger side, port up on driver side (get ur lean on). ill look for his build link. If all yall think more port would be good thats cool with me...id like to do a sub behind each seat,and one big port in the middle Link to comment Share on other sites More sharing options...
98HOEONSIXEZ Posted August 8, 2009 Author Report Share Posted August 8, 2009 Drawin up one right now homesliceI knew you were good for something LOLS ...thanks man! Link to comment Share on other sites More sharing options...
Hostility Posted August 8, 2009 Report Share Posted August 8, 2009 I knew you were good for something LOLS ...thanks man! take a grinder or something, and cut that bracket off on the back wall, i did that with mine, you gain at least another inch!!! 99 s10 4.3L Big 3 220amp alt Odyssey 1500 Odyssey 2150 Northstar NSB 75 Sundown Audio 3500D Sundown Audio 125.2 3 Sundown Audio SA-12's Alpine H/U RF Power Comp set 6.5" RF 3 sixty line driver 5.25 cubes @ 31hz Link to comment Share on other sites More sharing options...
brewer_brewer Posted August 8, 2009 Report Share Posted August 8, 2009 just build a false floor infront of that hump so everything sits nice and flat. ^^^that also give you a place to put things, ie: wire, crossovers, fuses, etc. REFS http://www.caraudioclassifieds.org/forum/itrader.php?u=2026 http://www.stevemeadedesigns.com/board/topic/44535-official-brewer-brewer-feedback/page__p__625998__hl__brewer__fromsearch__1entry625998 "you're not allowing natural selection to work, you're like the guy that invented the seatbelt" Link to comment Share on other sites More sharing options...
98HOEONSIXEZ Posted August 8, 2009 Author Report Share Posted August 8, 2009 take a grinder or something, and cut that bracket off on the back wall, i did that with mine, you gain at least another inch!!! A grinder?ppsshhh i pulled that thing off with my pinky!! lol naw ill cut it off...hhmmm where to put amps now Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.