Jump to content

Need 1/0 Gauge ring terminals for Big 4


Recommended Posts

You read that right, I'm doing the big 4! My alt is attached to the engine block through the bracket andthe bracket is tiny and has almost no surface area. So I'm going to upgrade that while I'm at it. So I'm basically doing:

Alt + to Batt +

Alt - to engine block -

Engine block - to Batt -

Batt - to chassis -

I'm going with some Knukonceptz wire because it's not too expensive. After everything is connected, I should use 10 feet of + and 15 feet of - (not too bad, considering the wire I'm going with is 1.75 per foot).

But I need some good lugs that won't cost me too much. Color doesn't matter. I have an Optima and 2 top post connectors for it, so I need... Ummm... about 5 or 6 connectors. Where can I get some? Can someone please post a link?

Thanks in advance.

My comp setup (Not bad for what it is):

HP Compaq Presario V6120US laptop with:

15.4" widescreen

AMD Turion 64 X2 1.6GHz processor

2x1GB stick DDR2 SDRAM (667 Mhz)

Seagate Momentus 500GB SATA HDD

128MB shared video memory

Windows 7 Home Premium 64 bit

12 cell Lithium Ion battery (actual battery usage time: 6 hours)

What it does:

635670364.png4532707.png

On a USB 2.0 Wireless card

Link to comment
Share on other sites

If you are ordering wire from knukonceptz why wouldn't you just order ring terminals from there too?

-Installer for Duke's Car Stereo

2000 Pontiac Grand Prix - Ported Eaton M90 S/C, 3.5" pulley, XS Power Headers, 1.9 Rockers, FWI, Poly Motor Mounts, Custom Tune.

RF T1000-1bdCP and T400-4

Boston Acoustics SPG 555

Kenwood eXcelon 995

RF Punch 6.5" components and MB Quart Premium 6x9"s

Powermaster Alternator, YellowTop D34, Vmax CT1000

Link to comment
Share on other sites

If you are ordering wire from knukonceptz why wouldn't you just order ring terminals from there too?

They have ring terminals?...

I can't find them. Gotta link?

In a way, I feel like an idiot.

Edited by 1992Chevy K1500

My comp setup (Not bad for what it is):

HP Compaq Presario V6120US laptop with:

15.4" widescreen

AMD Turion 64 X2 1.6GHz processor

2x1GB stick DDR2 SDRAM (667 Mhz)

Seagate Momentus 500GB SATA HDD

128MB shared video memory

Windows 7 Home Premium 64 bit

12 cell Lithium Ion battery (actual battery usage time: 6 hours)

What it does:

635670364.png4532707.png

On a USB 2.0 Wireless card

Link to comment
Share on other sites

just go from the alt to the battery and frame no need to go alt to the block.

I'm not sure how well the block is connected to the frame. I want a solid connection. I'll check it out before I order, though.

My comp setup (Not bad for what it is):

HP Compaq Presario V6120US laptop with:

15.4" widescreen

AMD Turion 64 X2 1.6GHz processor

2x1GB stick DDR2 SDRAM (667 Mhz)

Seagate Momentus 500GB SATA HDD

128MB shared video memory

Windows 7 Home Premium 64 bit

12 cell Lithium Ion battery (actual battery usage time: 6 hours)

What it does:

635670364.png4532707.png

On a USB 2.0 Wireless card

Link to comment
Share on other sites

Found the terminals. My computer wasn't showing several of the links, the one with the terminals was one of them. Thanks for the help.

My comp setup (Not bad for what it is):

HP Compaq Presario V6120US laptop with:

15.4" widescreen

AMD Turion 64 X2 1.6GHz processor

2x1GB stick DDR2 SDRAM (667 Mhz)

Seagate Momentus 500GB SATA HDD

128MB shared video memory

Windows 7 Home Premium 64 bit

12 cell Lithium Ion battery (actual battery usage time: 6 hours)

What it does:

635670364.png4532707.png

On a USB 2.0 Wireless card

Link to comment
Share on other sites

the alternator makes the power for your electrical not your block.

if your going to your alternator for the ground no need to go to the block

Tibs 99 F-150 Build 8 twelves

8 - Re SE 12"s

2 - SunDown Audio Saz-3000d's

1 - vx4004 planet audio amp

big 3 1/0 gauge

MECHMAN 250 amp alt

MySpace

Link to comment
Share on other sites

the alternator makes the power for your electrical not your block.

if your going to your alternator for the ground no need to go to the block

So even if I replace the wire instead of complimenting it, my connection will be good enough? Like I said, I just want the best possible connection.

My comp setup (Not bad for what it is):

HP Compaq Presario V6120US laptop with:

15.4" widescreen

AMD Turion 64 X2 1.6GHz processor

2x1GB stick DDR2 SDRAM (667 Mhz)

Seagate Momentus 500GB SATA HDD

128MB shared video memory

Windows 7 Home Premium 64 bit

12 cell Lithium Ion battery (actual battery usage time: 6 hours)

What it does:

635670364.png4532707.png

On a USB 2.0 Wireless card

Link to comment
Share on other sites

Go from alt casing or bracket to frame and from batt - to that same exact spot on the frame should be sufficient. I have a 95 k1500 and thats how mine is.

Ok then. Should be similar since I have a 1992 K1500 myself. I'm going from the casing for the best connection. Thanks for the advice guys.

My comp setup (Not bad for what it is):

HP Compaq Presario V6120US laptop with:

15.4" widescreen

AMD Turion 64 X2 1.6GHz processor

2x1GB stick DDR2 SDRAM (667 Mhz)

Seagate Momentus 500GB SATA HDD

128MB shared video memory

Windows 7 Home Premium 64 bit

12 cell Lithium Ion battery (actual battery usage time: 6 hours)

What it does:

635670364.png4532707.png

On a USB 2.0 Wireless card

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Who's Online   1 Member, 0 Anonymous, 296 Guests (See full list)

×
×
  • Create New...