roscoe1129 Posted May 1, 2007 Report Share Posted May 1, 2007 as far as I can tell,... 16" is hella aero port! lol Quote Some people need a sympathetic pat... on the head...with my hammer Scientia est Vox "In Nomine Patris et Filii et Spiritus Sancti" DONT BE AFRAID TO USE THE SEARCH BUTTON!!! SMD SUPER BUYER/SELLER Link to comment Share on other sites More sharing options...
ChevyBoy Posted May 1, 2007 Author Report Share Posted May 1, 2007 (edited) the best part is, its for 2 10s lol. well 4 ports total for 2 boxes. anyone know how wide the 3" aero's are? and i meant 16" length, not width. im sure you knew that though...... Edited May 1, 2007 by ChevyBoy Quote Link to comment Share on other sites More sharing options...
roscoe1129 Posted May 1, 2007 Report Share Posted May 1, 2007 ewww i tore mine out of the benz box to put a 4 in when i switched subs.....i think if u go to partsexpress.com and look at them they mention what size hole is required Quote Some people need a sympathetic pat... on the head...with my hammer Scientia est Vox "In Nomine Patris et Filii et Spiritus Sancti" DONT BE AFRAID TO USE THE SEARCH BUTTON!!! SMD SUPER BUYER/SELLER Link to comment Share on other sites More sharing options...
ChevyBoy Posted May 1, 2007 Author Report Share Posted May 1, 2007 i couldnt find it anywhere when i looked. and ewww what? 3"? Quote Link to comment Share on other sites More sharing options...
roscoe1129 Posted May 1, 2007 Report Share Posted May 1, 2007 o.k. try ummmmmm instead not ewwww as in yuck ewwwww as in I had a brainfart! lol Quote Some people need a sympathetic pat... on the head...with my hammer Scientia est Vox "In Nomine Patris et Filii et Spiritus Sancti" DONT BE AFRAID TO USE THE SEARCH BUTTON!!! SMD SUPER BUYER/SELLER Link to comment Share on other sites More sharing options...
ChevyBoy Posted May 1, 2007 Author Report Share Posted May 1, 2007 ok. thats better so does anyone know how wide they are??? Quote Link to comment Share on other sites More sharing options...
roscoe1129 Posted May 1, 2007 Report Share Posted May 1, 2007 hell I even went to the precision site and it didnt say it just said cut hole size of inside flare........ hell if u have room from the sub holes I guess u could cut a 3 1/8th" hole and assemble it in the box if u plan on keeping ur box 4 a while..... Quote Some people need a sympathetic pat... on the head...with my hammer Scientia est Vox "In Nomine Patris et Filii et Spiritus Sancti" DONT BE AFRAID TO USE THE SEARCH BUTTON!!! SMD SUPER BUYER/SELLER Link to comment Share on other sites More sharing options...
ChevyBoy Posted May 1, 2007 Author Report Share Posted May 1, 2007 thing is, ill be getting a new truck within a year. ill be selling off the boxes so i was trying to make it simple. Quote Link to comment Share on other sites More sharing options...
andym85 Posted May 1, 2007 Report Share Posted May 1, 2007 english please. i hate trying to put 4 into x and 6 into y and what not. algebra was a few years back. basically, when u are finding the port length in whatever program/equation you are using, divide the box volume by the number of ports you have and then find the port length. that number is the length each port needs to be. as far as the diameter of a 3" port idk..the 4" diameter is 7.25" (a 3.25" difference) and the 6" is 9.5"(a 3.5" difference)...so i would say it would be a little under 6.25"... i would just cut a 5 7/8" hole but leave room if in case you have to make it bigger... Quote i likes me some audio stuff... Link to comment Share on other sites More sharing options...
ChevyBoy Posted May 1, 2007 Author Report Share Posted May 1, 2007 ill worry about it after i get them. thing is, ill have 11" of room to work with on one box, and didnt want to stack them. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.