LoudBimmer Posted December 24, 2009 Author Report Share Posted December 24, 2009 COME ON broif you dont have the electrical to power ur amp then TURN THE GAIN DOWN, this is rocket science... wire it for 1 ohm and set the gain for 6-700w @1ohm end of story whether you have it wired for 1 ohm or 2 ohm, YOU dictate how much power the sub gets by the GAIN setting ur sub isnt going to magically get 1200w if you dont set ur gain for that i rewired my sub and it came out to 1.3 ohms load. Link to comment Share on other sites More sharing options...
Guest Posted December 24, 2009 Report Share Posted December 24, 2009 i rewired my sub and it came out to 1.3 ohms load. there you go. 1 ohm load right there. its never gonna be perfect. now go tune your gains like we all have said 100 times edit: honestly man, it doesnt take this long to diagnose a problem and fix it. do what we tell you and your stuff will last Link to comment Share on other sites More sharing options...
IH8PunkRok Posted December 24, 2009 Report Share Posted December 24, 2009 set your voltage to 24.5 maybe 26 you still have a LOT to learn man ur lucky you got that DC woofer haha that coil should have exploded -Matt2005 Dodge Magnum RTJVC KD-AVX1 2 PPI S580.2 Obsidian Audio ST1 Horn Tweeters PRV 8MB450s Audio Legion 3500.1D 2 RE MT 18s 360 ah LiFePO4 BatterySHCA 2/0 155.2 @ 29 hzKicker CVR 15's buildDD 3512e buildMini T-Line Build(6) 8s BuildNightshade 15s Wall BuildMagnum AB XFL 12s BuildNewest Magnum Build Link to comment Share on other sites More sharing options...
Decaf Posted December 24, 2009 Report Share Posted December 24, 2009 and decaf, it IS rocket science lol. lol, i noticed that... it was suppose to say "isnt" you still have a LOT to learn manur lucky you got that DC woofer haha that coil should have exploded this is true, exploshun!! lulz please tell me u checked each voicecoils ohm before wiring them together to get ur 1.3 hopefully u didnt do any damage to the one coil hooked up otherwise just insert ur wattage into this equation R= rms wattage (R x 1.3ohm)sqrt = voltage to set gain at example (700w x 1.3ohm)sqrt = 30.1v Link to comment Share on other sites More sharing options...
oldschool Posted December 24, 2009 Report Share Posted December 24, 2009 Is It really 1.3 or 1 even because that will change the voltage amount when setting the gain iam going to say. 1even because your meter is off .3 I could be wrong but I doubt it. TEAM GROUNDPOUNDERS INC. 156.5 OUT THE TRUNK OF A 95 CADDY W/1 SUB & 2AMPs score done on a termlab mic in the kick on the dash sealed was 154 Link to comment Share on other sites More sharing options...
Guest Posted December 24, 2009 Report Share Posted December 24, 2009 internal DMM resistance couldve added a few tenths to the resistive load. touch the 2 dmm leads together and see what number you get. take that number and subtract it from 1.3 or w/e your subs resistance is through the meter. Link to comment Share on other sites More sharing options...
LoudBimmer Posted December 24, 2009 Author Report Share Posted December 24, 2009 this is true, exploshun!! lulzplease tell me u checked each voicecoils ohm before wiring them together to get ur 1.3 hopefully u didnt do any damage to the one coil hooked up otherwise just insert ur wattage into this equation R= rms wattage (R x 1.3ohm)sqrt = voltage to set gain at example (700w x 1.3ohm)sqrt = 30.1v each coil is 2 ohms. so 600w x 1.3ohm= ~27V. Link to comment Share on other sites More sharing options...
Guest Posted December 24, 2009 Report Share Posted December 24, 2009 dont do 1.3 ohms yet. your not 100% sure its exactly htat. do what i said in post 96 then redo the math Link to comment Share on other sites More sharing options...
Decaf Posted December 24, 2009 Report Share Posted December 24, 2009 each coil is 2 ohms. so 600w x 1.3ohm= ~27V. each coil is 2 ohms on the dmm? or they are called 2 ohm voicecoils? but yes that would be correct (27.9v) Link to comment Share on other sites More sharing options...
FOGEL A.K.A.MCLOVIN Posted December 24, 2009 Report Share Posted December 24, 2009 mine did the same thing, i have a lvl 3 15 so i think its just extra glue mine grew out of smelling like that on a sundown 1000d 1998 4dr blazer Alpine CDA 9884 head unit DC lvl 3 15" 3.7 CU FT box (without displacement) tuned to 36.9 1/0 welding cable Sundown Sae-1000D at 1 ohm Kicker 4x6 mids and highs in dash Hifonics Zeus 6.5 mids and highs in front doors Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.