Guest jbinn Posted January 24, 2010 Report Posted January 24, 2010 I had two 15" Kicker COMP dual 4's lying around (250RMS pce) in a sealed box (thats rather big) yes we are going to build him a ported box for them but for now this is fine they get down nicely... my question is HOW MUCH LOUDER will they be facing the rear of the van as opposed to being upfront aimed towards to windows? if any louder... this is a cargo van so it's really big. when we put the box upfront aimed towards the windows it was getting DOWN the roof was flexing a lot the rear doors were shaking, everything upfront was wiggling and moving, but I know for a fact these 15's should get down harder than that in a van because my boy has 2 12's in his SUV (diff dude) facing the back hatch and they friggin POUND... the reason I want to know before testing is I need about 15ft of good wire to do this.
mlstrass Posted January 24, 2010 Report Posted January 24, 2010 Van more then likely has more area to fill then the SUV and also the 12's could be better subs. ONLY way to tell which is best is to try it, but going by ear isn't a very good way to tell as you really need to put it on the meter. Whichever placement hits lower will sound louder to the ear...
Guest jbinn Posted January 24, 2010 Report Posted January 24, 2010 im not THAT worried about it... I just figured the front of the van aimed towards the windshield it was losing A LOT of power, the 12's my other friend is running are better but only a little and it shouldnt matter much since he's running less RMS than my boy in the van... I figured two 15's @ 500RMS would wang in a van but I'm not sure the best place to put it.
Tooshort064 Posted January 24, 2010 Report Posted January 24, 2010 rear of the van sub's firing up port firing back. make sure your about 6-12 inchesoff the rear doors . 95 Civic Coupe Pioneer AVH-P7600DVD Kinetik HC-1200 In Front Kinetik HC-2000 In Rear Memphis 16-MCA3004 2 X Memphis 16-MCD1000 With Maxxsonics MLX-100 2 X DC LVL 4 XL 12's Pioneer Premier TS-C720PRS In Door's Kenwood KFC-6982ie In Rear Deck All Memphis Wire/Rca's and misc.
Guest jbinn Posted January 24, 2010 Report Posted January 24, 2010 rear of the vansub's firing up port firing back. make sure your about 6-12 inchesoff the rear doors . Yeah I figured, how would I place a sealed box though? for now until I make the new vented box. just aim them at the back or at the roof
Tooshort064 Posted January 24, 2010 Report Posted January 24, 2010 fire the sealed towards the rear of the van and close to the doors ( about 6 inches ) this allows the subs to load off the doors and should be louder than up front if not i bet it flex's like hell 95 Civic Coupe Pioneer AVH-P7600DVD Kinetik HC-1200 In Front Kinetik HC-2000 In Rear Memphis 16-MCA3004 2 X Memphis 16-MCD1000 With Maxxsonics MLX-100 2 X DC LVL 4 XL 12's Pioneer Premier TS-C720PRS In Door's Kenwood KFC-6982ie In Rear Deck All Memphis Wire/Rca's and misc.
jizazz12 Posted January 24, 2010 Report Posted January 24, 2010 this or wall it off,seal it off from the rear and fire it forward. 2007 Chevy Impala LS 1 Crescendo 3KWP 1Crescendo C1000/4 2 DC lvl 4 15's with lvl5 dual .7 coils 1Audio Control Matrix 1 Pioneer P880PRS 1 300 amp Iraggi alt All power runs done with Knu flex 0/1 guage 1 optima yellow top under the hood 1 XS 5100 and two Deka's in the trunk 4 Crescendo MP-8 mid bass drivers 2 DB Drive p5 5 D Pro Audio tweeters
Recommended Posts
Archived
This topic is now archived and is closed to further replies.