philip Posted June 1, 2007 Report Posted June 1, 2007 (edited) how do i do this? might sound dumb but is it possible to strap two together and run it to one woofer. my friend is selling one and i already have one so i was just wondering if i can do this or sell my amp and get a t2k. Edited June 1, 2007 by philip Quote
emperorjj1 Posted June 1, 2007 Report Posted June 1, 2007 you would need the BDSYNC 2 cable Quote J. JMy CardomainFINISHED COBALT SS/SC DUAL ALTERNATOR PICS theres no such thing as too expensive when it comes to upgrades like that, because imo if you are gonna spend to upgrade then do it correctly rather then be a cheap ass ricer
philip Posted June 1, 2007 Author Report Posted June 1, 2007 you would need the BDSYNC 2 cable ??? i would wire one coil to one amp and the other coil to the other amp? Quote
j_black10 Posted June 1, 2007 Report Posted June 1, 2007 ??? i would wire one coil to one amp and the other coil to the other amp? Like this Quote AudioControlRockford FosgateXSPower
Chris Posted June 1, 2007 Report Posted June 1, 2007 That pic is wierd, ^^^ I didn't know RF made HU's? Quote 4 15" FI Q D2's in 12 cubes tuned to 32hz 1- T1000.1bd's 3 Maxx 29 deep cycles 4 runs of 1/0 gauge -Big 3 -Trunk sealed off from the cabin Custom 15.8 dual-volt switching MLA module All in a CAR.
Eric B Posted June 1, 2007 Report Posted June 1, 2007 That pic is wierd, ^^^ I didn't know RF made HU's? yes they did back in the day, i heard they were really good too Quote 2007 Chevy HHR LT UNDER CONSTRUCTION 1st Place Loud N Low 2010 MWSPL Finals 3rd Place Xtreme 3 2010 MWSPL Finals
Chris Posted June 1, 2007 Report Posted June 1, 2007 If they started again, they would officially KILL Alpine, Sony, & Pioneer as the leading manufacturers. However back on topic, I think I already started a thread like this one a few weeks ago, & this one should be moved to the RF section. Quote 4 15" FI Q D2's in 12 cubes tuned to 32hz 1- T1000.1bd's 3 Maxx 29 deep cycles 4 runs of 1/0 gauge -Big 3 -Trunk sealed off from the cabin Custom 15.8 dual-volt switching MLA module All in a CAR.
Derrick824 Posted June 1, 2007 Report Posted June 1, 2007 Just run one amp to each coil You don't need to strap them for that. Simply use the Master/Slave feature. Quote
emperorjj1 Posted June 1, 2007 Report Posted June 1, 2007 actually the reason rf stopped selling hu's was because they wernt making profit. Quote J. JMy CardomainFINISHED COBALT SS/SC DUAL ALTERNATOR PICS theres no such thing as too expensive when it comes to upgrades like that, because imo if you are gonna spend to upgrade then do it correctly rather then be a cheap ass ricer
philip Posted June 2, 2007 Author Report Posted June 2, 2007 thanks a lot guys. so it would be all right with dual 2 ohm woofer? it looks like the diagram says i need a min. 2 ohm load. i could be wrong, but if i wire it like that would i be at a 1 ohm load parallel? just don't wnat to burn anything. thanks in advance and you guys are the greatest! also, if i do run each coil to each amp and have one master and one slave, each amp would see a 2 ohm load? Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.