07 Avalnche 2 18 FI Sundown 3500d Zapco 1000.4 Reference

[enemyofsilence]

http://i358.photobucket.com/albums/oo24/1s...th_IMG_3026.jpg

^^^ put this in between the

[firstchoicehome]

back side of kicks ready for the mid i had to use a jigsaw to cut the mid hole i wanted to use a body saw but had to improvise

[firstchoicehome]

one side ready to go

[firstchoicehome]

these are going in the front door and a pillar

[firstchoicehome]

a pillars came off easy two bolts on passenger one on driver side several clips

[firstchoicehome]

not sure if this air bag is dangerous to work around but oh well

[firstchoicehome]

here is the sketchy bose factory tweets small hard dome i think

[firstchoicehome]

first i had to make the tweeter hole bigger this is a trick i learned with the hole saw since there is already a hole in the trim panel there is no place for the pilot drill bit.

so if you clamp a board to the backside of the trim panel and find the center the board will anchor your pilot bit. Be carefull how big a hole you cut here because the bose grill is not that wide.

[firstchoicehome]

the bose grill is what holds the factory tweet in place so you have to butcher it with a razor knife so the after market tweet will have clearance and the grill will fit flush

[pervitizm]

here is the sketchy bose factory tweets small hard dome i think

Thanks for this pick. Now I know what those factory tweeters look like in my burban. I'm hoping by March I can have my doors and pilars done. I too want to go with some of the Qlogics kicks and then 6.5 or 8 midbass in the doors and another set of tweets in the factory location.